Power FC Forum Apex Power FC Support and Questions.

Power FC help! no start after pfc install

Thread Tools
 
Search this Thread
 
Old 04-24-06, 08:20 PM
  #1  
boost > *

Thread Starter
 
adictd2b00st's Avatar
 
Join Date: Aug 2004
Location: buffalo, ny
Posts: 1,527
Likes: 0
Received 0 Likes on 0 Posts
help! no start after pfc install

ok, finished up everything on the car and went to turn the key for the first time in a lil over a year (single turbo and pfc)...... all she does is crank, no start i'm getting 40psi of fuel pressure so i know i'm good there, i'm also getting spark. any ideas of where to look next? i didn't "cut" the "4 wires" yet, but i read that the car will still run either way. this could be a case of doing too many things at once... i don't know where to start
Old 04-25-06, 09:24 AM
  #2  
Eye In The Sky

iTrader: (2)
 
cewrx7r1's Avatar
 
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,892
Likes: 0
Received 114 Likes on 66 Posts
Question

You check everything that affects timing/spark/fuel.
Old 04-25-06, 09:31 AM
  #3  
ky7
Full Member

 
ky7's Avatar
 
Join Date: Jul 2005
Location: Kerry
Posts: 172
Likes: 0
Received 0 Likes on 0 Posts
Re-init the pfc if you have installed it for the first time and you are not afraid of loosing any maps. Then give a try.

If you are getting spark and fp then it must be the fuel. I have noticed anomalies with this when switching from using FC-Pro software to FC-Edit. Maps getting messed up etc, car wouldn't start because there was not enough fuel..

Last edited by ky7; 04-25-06 at 09:34 AM.
Old 04-25-06, 10:14 AM
  #4  
The one
iTrader: (5)
 
Jason's Avatar
 
Join Date: Jul 2001
Location: Fort Worth, TX
Posts: 3,862
Likes: 0
Received 4 Likes on 4 Posts
Change your gas!
Old 04-25-06, 10:40 AM
  #5  
boost > *

Thread Starter
 
adictd2b00st's Avatar
 
Join Date: Aug 2004
Location: buffalo, ny
Posts: 1,527
Likes: 0
Received 0 Likes on 0 Posts
ok it turns out i'm mistaken, we don't know if the car is getting spark ( my car is in cleveland and i'm in ny, i misunderstood what he said over the phone) he said he needs another set of hands there to check spark. he checked all the little things since it was getting late (fuses, making sure everything is plugged in tightly etc) but hasn't gotten into it in depth yet.

the map im running is from the guys at rx7store so i'm pretty sure its not gonna be that, and yes there is new gas in the tank i'm REALLY hoping its not getting spark so we can narrow it down to that atleast.

i hate being so far from the car, i feel like my hands are tied behind my back :tdown:
Old 04-25-06, 01:03 PM
  #6  
boost > *

Thread Starter
 
adictd2b00st's Avatar
 
Join Date: Aug 2004
Location: buffalo, ny
Posts: 1,527
Likes: 0
Received 0 Likes on 0 Posts
random thought........my stock coils have 90k miles on them........ maybe i should try swapping those
Old 04-25-06, 06:35 PM
  #7  
Eye In The Sky

iTrader: (2)
 
cewrx7r1's Avatar
 
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,892
Likes: 0
Received 114 Likes on 66 Posts
My original coils have over 105,000 miles and have been fired by a Crane HI-6R for about 5 years and a HKS Twin Power for two years and they work perfectly.
Old 04-25-06, 07:16 PM
  #8  
boost > *

Thread Starter
 
adictd2b00st's Avatar
 
Join Date: Aug 2004
Location: buffalo, ny
Posts: 1,527
Likes: 0
Received 0 Likes on 0 Posts
yea, just a thought tho.......couldn't hurt
Old 04-26-06, 08:59 AM
  #9  
Eye In The Sky

iTrader: (2)
 
cewrx7r1's Avatar
 
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,892
Likes: 0
Received 114 Likes on 66 Posts
But you do not have to swap them out in order to test them.
Old 04-26-06, 10:32 AM
  #10  
boost > *

Thread Starter
 
adictd2b00st's Avatar
 
Join Date: Aug 2004
Location: buffalo, ny
Posts: 1,527
Likes: 0
Received 0 Likes on 0 Posts
it was only $35 for the pair i'll eventually need them anyways right? haha

so yea, this kinda stinks he's outta town till friday, i was gonna head out there today on my day off but i can't cause there'd be no way for me to even get in.......
Old 05-03-06, 09:21 PM
  #11  
Full Member

iTrader: (1)
 
4estRX7's Avatar
 
Join Date: Mar 2003
Location: omaha
Posts: 210
Likes: 0
Received 0 Likes on 0 Posts
Crazy, I have the same problem, but maybe more serious. My FD Sat for the winter, put in new plugs and all it does is crank. The weird thing is that I hear a electrical type hummmmmmm around the intake manifold when the ignition is still engaged but not turning the engine over.

Any thoughts?
Old 05-04-06, 07:47 PM
  #12  
boost > *

Thread Starter
 
adictd2b00st's Avatar
 
Join Date: Aug 2004
Location: buffalo, ny
Posts: 1,527
Likes: 0
Received 0 Likes on 0 Posts
mine ended up being the pfc was set up for the wrong map sensor, i need to get my hands on a datalogit
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
cristoDathird
Introduce yourself
28
05-30-19 08:47 PM
Th0m4s
Build Threads
25
02-26-19 02:04 AM
torky007
3rd Generation Specific (1993-2002)
7
08-17-15 05:14 PM
gabescanlon
Interior / Exterior / Audio
1
08-11-15 05:59 PM



Quick Reply: Power FC help! no start after pfc install



All times are GMT -5. The time now is 02:09 AM.