Power FC help!! Air intake temp on Power FC
11-29-05, 03:16 PM
#1
Newbie
Thread Starter
Join Date: Nov 2005
Location: Central Florida
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
help!! Air intake temp on Power FC
Hi all, I just got my RX-7. On the FC Commander the air temp is not reading. I uplugged the clip under the intake manifold thinking it might be loose. The temp is still not reading. I drove the car home not going into boost at all, and was wondering if I could drive the car hard without this sensor untill the weekend. Please advise. Thanks
11-29-05, 03:37 PM
#2
RX-7 Bad Ass
iTrader: (55)
It's simple - either the sensor is bad or there's a break in the wiring to it.
I would take it easy until that's fixed - it's a pretty major input to the ECU. No use romping on it if it could lead to problems when you know you have a problem with the car.
Dale
I would take it easy until that's fixed - it's a pretty major input to the ECU. No use romping on it if it could lead to problems when you know you have a problem with the car.
Dale
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM