question, im about done with my rebuild, and was curious the manual says to do the learning process but i've taken out my A/C and thats in the learning process under load, how or do you have to skip this step???

 

The learning process is just that -- the PFC "learns" what settings are appropriate for idling at each load condition...if you will never have that load condition, there's nothing to learn!

 

thanks,

 

Just a thought, but you might still want to go through the learning process for the AC, since you can use that switch to artificially turn your fans on at a lower temperature. If you don't go through the learning process for it, it will still bounce around when you press the switch, even if the AC isn't there....

 

If i took out my A/C, should i skip the A/C part in the learning ??