Power FC Ecu voltage vs battery terminal voltage.
#1
Arrogant Wankeler
Thread Starter
Ecu voltage vs battery terminal voltage.
Apexi is reading about 0.3V less than a multimeter across the battery terminals both ignition powered before starting (less earthing current through ecu) and engine running (only tested at idle). Is this close to what I should expect or do i need to go chasing connectors/earths?
The main engine harness earth that bolts to the front plate behind accessories and front plate itself were cleaned up recently when i fitted aftermarket coils.
The main engine harness earth that bolts to the front plate behind accessories and front plate itself were cleaned up recently when i fitted aftermarket coils.
The following users liked this post:
Slides (01-30-18)
#4
Super Raterhater
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,624
Likes: 0
Received 2 Likes
on
2 Posts
The ADC only has so many bits to store the voltage range within, which gets reduced even further when sent to FC-EDIT, so there's some loss in accuracy. I wouldn't worry about it unless its a significant drop.
Thread
Thread Starter
Forum
Replies
Last Post
Enthu
1st Generation Specific (1979-1985)
3
12-06-07 04:45 PM
mr_vaughn
2nd Generation Specific (1986-1992)
2
07-29-05 08:22 PM
JONSKI
3rd Generation Specific (1993-2002)
6
08-04-02 11:42 AM