Power FC Connecting UEGO to PFC for Datalogging
03-22-07, 10:41 PM
#1
Connecting UEGO to PFC for Datalogging
Yeah....Yeah.....Yeah..... So I didn't do enough research for once in my life and bought the frigging AEM WB.... 
That I already know. But some HAVE had good luck with it and I already have the thing so I might as well give it a go before pitching it in the trash..
Anyways, my question is how do I connect it to the PFC for datalogging?
Also, do I need to somehow connect my Profec B to the PFC as well? How?
Thanks
-Noah-
That I already know. But some HAVE had good luck with it and I already have the thing so I might as well give it a go before pitching it in the trash.. Anyways, my question is how do I connect it to the PFC for datalogging?
Also, do I need to somehow connect my Profec B to the PFC as well? How?
Thanks
-Noah-
03-23-07, 11:09 AM
#2
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,895
Likes: 0
Received 114 Likes
on
66 Posts
Many stand alone boost controllers do not care about your engine's ECU, and
some may interface to the ECU.
The instructions will tell if it is needed.
A WB O2 sensor does not connect to the PFC as the PFC can not log. Only the DATALOGIT can log the PFC and a WB. The WB connects to the DL.
some may interface to the ECU.
The instructions will tell if it is needed.
A WB O2 sensor does not connect to the PFC as the PFC can not log. Only the DATALOGIT can log the PFC and a WB. The WB connects to the DL.
Thread
Thread Starter
Forum
Replies
Last Post
Captain Hook
2nd Generation Specific (1986-1992)
13
10-04-15 06:35 PM
FC3S Timmy
2nd Generation Specific (1986-1992)
16
10-03-15 01:08 AM