Power FC Changed from Aem to PFC, misfires at higher boost
#1
Full Member
Thread Starter
Join Date: Aug 2003
Location: Sundsvall
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Changed from Aem to PFC, misfires at higher boost
A few weeks ago i changed from Aem to the PFC.
A friend af mine helped me tune it, it was going great.
It works great up to 12psi (0.8Bar), then i get something that reminds me about spark blow out. It kinda studers... The boost will keep on going, but theres no idea of keep on going. So we figured it was bad spark plugs.
But ut wasnt... I´ve checked and re-checked everything.
My friend is really competent, and since we thought it was the plugs. So i dont think he did anything wrong.
I didnt have any problems with the Aem, i could do hi boost runs with that. And i just changed to the Apexi... I didnt change anything else.
Please help guys.
A friend af mine helped me tune it, it was going great.
It works great up to 12psi (0.8Bar), then i get something that reminds me about spark blow out. It kinda studers... The boost will keep on going, but theres no idea of keep on going. So we figured it was bad spark plugs.
But ut wasnt... I´ve checked and re-checked everything.
My friend is really competent, and since we thought it was the plugs. So i dont think he did anything wrong.
I didnt have any problems with the Aem, i could do hi boost runs with that. And i just changed to the Apexi... I didnt change anything else.
Please help guys.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM