My FC datalogit works ok, i mean it reads teh map off the pfc.

Problem is i cant map watch or ghost trace or view anything other than the settings.

any ideas>?

 

You have to be logging for any of those features to work.

thewird

 

The datalogit seems to be logging now and i can view everything which is good. I solved the problem by removing the hand controller. It seemed to work ok.

wideband is logging too. problem now is still getting rid of this ignition breakup. my afrs are in the 9s right accross my map. after 3500 rpm and mostly over aptmospheric boost.

help

 

Running that rich will cause breakup.

thewird

 

The DL does not work properly with the commander plugged into it even though they say it is suppose to do it.

 

that will probably explain it. i might sell my commander now as theres no need for it.

Did you get my money cewrx7r1????

 

Also i have tested the earths and the coil and engine are ok. i was going to ask would leaky injectors mean too much fuel going in which would cause the spark blowout?

 

I haven't seen a problem with mine (black box) yet. Was this a problem with older style (beige box)? Or is the data that comes through unreliable?

 

When my hand controller is plugged in the fc is very temperamental

 

I've never had a problem either. The DL(Black) just freezes the commander when I log, but once I quit logging it goes back to working, but I've always figured this is normal.

 

Same here for me.