Power FC cant seem to lean out my idle
12-11-05, 12:49 PM
#1
cant seem to lean out my idle
I have 800cc primaries and can't lean out my idle. It stays at around 11:1
I set my inj percentage to 64 and have played with the lag from .04 to negative 0.30 with no luck. Also adjusting fuel cells does nothing.
I set my inj percentage to 64 and have played with the lag from .04 to negative 0.30 with no luck. Also adjusting fuel cells does nothing.
12-12-05, 06:01 PM
#3
Full Member
Join Date: Aug 2004
Location: Huntington Beach
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
is ur wideband set up and calibrated properly....?
also... in setting screen 3 there is section on inj adjustment.... if u lower those percentages in the rpms u want... then there will be that much less fuel... well... at least thats how its suppossed to work....plz read up on setting 3 dont just go changing numbers.
also... in setting screen 3 there is section on inj adjustment.... if u lower those percentages in the rpms u want... then there will be that much less fuel... well... at least thats how its suppossed to work....plz read up on setting 3 dont just go changing numbers.
12-17-05, 10:22 PM
#4
Originally Posted by twin snails
- 0.53 worked for me on my 850's. 13.5 idle AFR
Ho damn! -.053 must be the magic number. I plugged that number in and farted around with the idle and got it to run a smooth 14:1 (anyone know how to get a decimal point in a watch window?) I then drove it around the block and noticed it liked to buck at partial throttle, then I realized i forgot to add fuel across the board. I fixed that issue and did some minor fine tuning. I think all around the car is acting much better, everything just seems smoother.
Thread
Thread Starter
Forum
Replies
Last Post