Power FC cant rev with pfc, drops rpm to idle
#1
Junior Member
Thread Starter
Join Date: Aug 2007
Location: Finland
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
cant rev with pfc, drops rpm to idle
Topic says the problem. My car works fine with original ecu, but with pfc it idles good and everything but wen i try to rev engine it revs about 1 sec and then flats to idle. What can be the problem. it seem like it cuts fuel.. also i noticed heat warning light is on all the times. My car is -93 fd with nonseq, intercooler, intake, dp, catback, rad upgraded.. Also i checked sensors and vta-1 was highlighted and reading was 4.86, my car water temp was 82 when i started installing it cos i was just driving with original ecu. The water temp correction highest point was 80 but i didnt dare to touch it cos i dont have manual for pfc and dont know exactly what it does. And sorry for bad english. Its not my native language
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
83revival
New Member RX-7 Technical
4
09-03-15 10:42 PM