Power FC Forum Apex Power FC Support and Questions.

Power FC Can Anyone vouch for RX7Store PFC tuning?

Thread Tools
 
Search this Thread
 
Old Dec 27, 2005 | 12:37 PM
  #1  
VegasFD's Avatar
Thread Starter
Wishin I Still Had The FD
Tenured Member 15 Years
 
Joined: Sep 2005
Posts: 1,420
Likes: 1
From: Las Vegas, NV
Can Anyone vouch for RX7Store PFC tuning?

I recently purchased a Power FC for RX7Store.net. With it they included tuning for the particular mods I have. Has anyone else had their's tuned by RX7store, and if so, how did it turn out. The reason I'm asking is the last thing I want to do is blow my engine running too lean etc. Thanks for your help.
Reply
Old Dec 27, 2005 | 12:53 PM
  #2  
RotorJoe's Avatar
Hooray For Boobies!!!
Tenured Member 05 Years
 
Joined: Sep 2002
Posts: 3,570
Likes: 1
From: Washington
I didn't have him do a full tune, but Jason did give me a timing map.

I had a pretty good tune before just rich and stumbling on it's self at high rpm after the previous owner pulled the Jacobs ignition amp off. I bought the car and was able to clear it up with the HKS twin power. But I had Jason look at my timing maps just to be safe. He changed just a few cells in the leading and trailing timing at around 6000-8000 rpm. At that time I had the datalogit, wideband and was monitoring knock levels. He gave me more conservative timing numbers up there.

So I made the changes and logged numbers. I found that my knock levels were 5-10 lower then before up in the 6000-8000 range. I was hitting 30-40 and now I saw 20-30. So I kept his changes. Didn't notice or feel andy power changes, but I didn't expect to with that minor of a change.

This was all done over the phone with listed details of my mods. I've then later pulled fuel out a few areas to help the tone the richness back some.

Just be careful and take it slow, log and monitor everything you can.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Andrew7dg
1st Generation Specific (1979-1985)
3
Aug 6, 2017 01:41 PM
baix2
Power FC Forum
1
Sep 28, 2015 09:40 AM
choddaboy
Introduce yourself
0
Sep 26, 2015 06:35 PM




All times are GMT -5. The time now is 06:13 PM.