Hey guys I'm sure this has been covered before but I couldnt find anything that fully answered my question so here goes. I am days away from completing my rebuild. I basically have every bolt on and a large street port. Now my question is will it be safe to drive around breaking it in with a street port with the base map on the pfc? I know not to go over 4k and no boost but what happens if say for example I go up a hill and hit a little boost could this possibly blow my motor? thanks guys!

 

I hate to be crude, but how can we help you if we don't know your mods? Every bolt-on? Is this a GT-84 single turbo 8 rotor? Comon help us out. List them all.

 

sorry I have the stock twins ran seq., intake, down pipe, resmidpipe, catback, greddy smic, pfc, large street port. stock fuel until it is broken in and can get it tuned. I might be forgetting something but thats off the top of my head.

 

(1) Reset the PFC to it's mod base map.
(2) Make sure that the injector setup is correct.
(3) Make sure that the Function Settings are correct.
(4) No way a sane person can blow the engine at even 4psi boost, but since ...
you can always add a hell of a lot of fuel to the PIM VOLT (rpm or sensor).