Power FC Boost Control and PFC
#1
Bridgeport Anyone??
Thread Starter
Boost Control and PFC
I have always had a boost controller in my RX with the power FC. Now I've heard you can adjust boost with the PFC. Anyone know how to do this? I will be getting my car back from KD this week and I'm sure I can figure it out. I wanna run 10psi for daily driving and 15psi at the track. Skip said it's easy to do with the power FC because it has 2 boost settings. Thanks you guys in advance.
Mike
Mike
#2
Boost control
Yes the PFC can control boost. You have to get the Apexi Power FC boost controller harness and stepper motor. Not sure if there sold separately or as a set, but I do know it's the same stepper motor that comes with the Super AVC-R.
It's just my opinion but, if you already have a boost controller that works well than it's kind of a waist. I've also heard some people complain about the Power FC boost controller hunting, sluggish response, and difficult to set and to keep at the correct boost. But than again some people have no problems using it. Just depends on what you want and your perspective. I run the Greddy Profec B Spec and it works great with the Power FC. It's reliable and gives rock solid boost.
Hope this helps...
It's just my opinion but, if you already have a boost controller that works well than it's kind of a waist. I've also heard some people complain about the Power FC boost controller hunting, sluggish response, and difficult to set and to keep at the correct boost. But than again some people have no problems using it. Just depends on what you want and your perspective. I run the Greddy Profec B Spec and it works great with the Power FC. It's reliable and gives rock solid boost.
Hope this helps...
#3
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
YOU DO NOT NEED THE APEXI BOOST CONTROL KIT.
The PFC controls the boost right out of the box using the stock solenoids. Personally, I much rather prefer a separate boost controller.
The PFC controls the boost right out of the box using the stock solenoids. Personally, I much rather prefer a separate boost controller.
Thread
Thread Starter
Forum
Replies
Last Post