Power FC back to stock ecu

Reply Subscribe

Thread Tools

Search this Thread

Jan 24, 2008 | 12:27 AM

dregg100

Thread Starter

Junior Member

iTrader: (34)

Joined: Nov 2004

Posts: 14

Likes: 0

From: AZ

back to stock ecu

i just bought an FD that i plan to put back to factory stock and sell, and wanted to know what was involved(if anything) in putting a stock ecu back in besides plugging it in? thanks

Jan 24, 2008 | 11:58 PM

moconnor

Eats, Sleeps, Dreams Rotary

iTrader: (14)

Joined: Jul 2003

Posts: 4,678

Likes: 97

From: Bay Area, CA

Nothing. Just make sure that your boost is limited to 10psi.

Jan 25, 2008 | 03:49 AM

dregg100

Thread Starter

Junior Member

iTrader: (34)

Joined: Nov 2004

Posts: 14

Likes: 0

From: AZ

stock main cat!! thanks, thats what i thought

Jan 25, 2008 | 04:58 AM

dguy

Rotary Freak

iTrader: (8)

Joined: Apr 2006

Posts: 1,657

Likes: 332

From: sb

Replace the pins that are removed during installation, there are three I believe, egr solenoid, egr valve and....I'm blanking on the last.

Jan 25, 2008 | 10:59 AM

cewrx7r1

Eye In The Sky

iTrader: (2)

Joined: Feb 2001

Posts: 7,941

Likes: 133

From: In A Disfunctional World

Quote:

Originally Posted by moconnor

Nothing. Just make sure that your boost is limited to 10psi.

This is only true if no solenoids or other such devices were not removed!
If they were removed, it will cause ECU errors. Terminate such missing devices with the proper size resitors.

Don't ask, use the manual.