Power FC Apexi Power FC Comander
05-31-06, 11:13 AM
#1
Junior Member
Thread Starter
Join Date: Apr 2006
Location: England
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Apexi Power FC Comander
Just had the Apexi Power FC with Comander fitted by REWORX and all is good. 297bhp! so im happy.
just 1 question, on the monitor mode, the guy said best to have 4 channel and watch the
Injector duty
Air temp
Water temp
Knock
the first 3 i can watch and know whats going on, but with the knock what levels is the "knock" getting dangerous at ??
any help would be good
regards Nath
just 1 question, on the monitor mode, the guy said best to have 4 channel and watch the
Injector duty
Air temp
Water temp
Knock
the first 3 i can watch and know whats going on, but with the knock what levels is the "knock" getting dangerous at ??
any help would be good
regards Nath
05-31-06, 01:14 PM
#2
Good question. The knock sensor is kinda like a big microphone it's gonna pick up everything. On decel it goes thorugh the roof. I only watch it under WOT to make sure that the levels are low. Which they should be.
Sorry I do not have an exact number for you.
Sorry I do not have an exact number for you.
05-31-06, 05:44 PM
#3
Full Member
Join Date: Mar 2006
Location: Lawrence, KS
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
From what I've been told you should see a "regular" number associated with your driving and look for anything that is significantly higher than that afterwards.
I don't see anymore than 45-46 on 91 octane with 85-90* coolant temps and a max of 60* intake temp. A couple weeks ago I did see 105 on the knock reading and I started flipping out. Just a fluke or something I should be concerned about?
I don't see anymore than 45-46 on 91 octane with 85-90* coolant temps and a max of 60* intake temp. A couple weeks ago I did see 105 on the knock reading and I started flipping out. Just a fluke or something I should be concerned about?
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM