So my car has a problem I cannot figure out. The car Idles at 900 RPM and when the AC comes on the car turns off. I tried to adjust the Idle on the FC Controller and it does not respond. I have no experience with a rotary so any help wpould be appreciated.

What should I do? or what should I be looking at?

Thanks in advance

Janoy

 

try starting here:

https://www.rx7club.com/showthread.p...=power+fc+idle

 

^^ That should get you fixed right up. Good Luck!! and welcome to owning an FD!

 

Thanks guys that tread is awesome!

 

Ok so I got the car to idle. I think before I get any further I am going to uninstall the turbo and manifold and check everything. Today I found the manifold loose and the turbo loose. I am afraid that there might be anything else loose so I will disassemble the top and lower part and as long as I'm there I am going to replace all the vacuum lines.

Is there anything else I should look at as long as I have all this appart?

Janoy

 

pressure test for boost/vacuum leaks

 

I heard that vacuum leaks can cause a lot of problems... Thank will do.