I noticed you can buy the solenoid and the 3 bar for around $200, other than the harness what is the advantage of buying the kit?
If anyone is running this kit will they express their opinion regarding its performance.

Or should I just buy a Profec B and a 3 bar?

thanks

 

i had a hard time locating the apexi unit...and gave up and just got the profec b. i also heard people having trouble using the apexi unit...but im sure they just weren't using it right. but anyways, the profec b is a very good unit...just kinda big

 

http://www.takakaira.co.jp/asp/table...NnJkKkfhGielHg

this is the link to the jap company takakaira.com.jp they have the boost kit

ups; are you can use the factory harness you can use the full potential of power fc and control everything from the commander and comes with a 3 bar map sensor no splicing or cutting, less **** on dash too,

i have it and its all plug and play stuff it rocks


good luck

 

thanks for the replies...


I have already purchased the solenoid and intend to try this route. I will add a GM 3 bar and have a new boost control kit for around $200.

I have had very good luck with the PFC controlling boost on the twins. I also want to have my interior to be as stock as possible.

Power Put would you mind looking to see if the the solenoid is connected to the connector with the white dot? If the connector doesn't have a dot please look at the wire color scheme.

thanks

 

I recently purchased the apex boost control kit and it works great. At first, i didnt know how to use it but once you get the hang of it, its great!!!

 

https://www.rx7club.com/showthread.p...hreadid=308443