Power FC Apex'i Boost Control Kit Questions
01-21-03, 02:01 PM
#1
Senior Member
Thread Starter
Join Date: Jul 2001
Location: Sarasota FL/Ft Lauderdale
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
Apex'i Boost Control Kit Questions
I am I correct in assuming that I can still use my Profec B to control boost even with the Apex'i boost control kit installed? And does any one know who has these kits in stock at this time?
Thanks, Bill
Thanks, Bill
01-21-03, 04:53 PM
#2
Yes you can still use your boost controller.
Contact Ray at SR Motorsports for the kit.
If you do not plan to use the Apexi kit to control boost then consider buying a GM 3bar map sensor and harness for about $60-70. PM me if you cannot find the purchase and setup info on the GM 3bar, I found it on the Forum using the search feature.
Contact Ray at SR Motorsports for the kit.
If you do not plan to use the Apexi kit to control boost then consider buying a GM 3bar map sensor and harness for about $60-70. PM me if you cannot find the purchase and setup info on the GM 3bar, I found it on the Forum using the search feature.
01-21-03, 07:02 PM
#3
Senior Member
Thread Starter
Join Date: Jul 2001
Location: Sarasota FL/Ft Lauderdale
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
Thanks a lot twokrx7.
I like the Apex'i kit because you use the stock map sensor to read ambient air pressure so the PFC can correct for it. But I will let you know if I need the GM info.
I like the Apex'i kit because you use the stock map sensor to read ambient air pressure so the PFC can correct for it. But I will let you know if I need the GM info.
Thread
Thread Starter
Forum
Replies
Last Post
