Power FC Anyone ever try rescaling the lower map reference?
#1
Junior Member
Thread Starter
Join Date: Dec 2008
Location: Auburn, Al
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Anyone ever try rescaling the lower map reference?
I wanna try taking away the lowest ranges of map PIM 1000 - 3000. Anything in 3000's is only reached when I'm off throttle (bridge port'd) and as soon as I crack the throttle I move into the mid 4000's. So atleast 2 rows of the map are completly untouched and even the 3000 row doesn't do anything since the injectors are off.
I've rescaled the map refernce to be 4000 - 23000 with 1000 increments, I then converted the IGL, IGT, and INJ maps to be the same after the change.
Anyone have any thoughts or have tried this before?
I've rescaled the map refernce to be 4000 - 23000 with 1000 increments, I then converted the IGL, IGT, and INJ maps to be the same after the change.
Anyone have any thoughts or have tried this before?
#4
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,895
Likes: 0
Received 114 Likes
on
66 Posts
Most engines idle in P rows 4 to 5. That means P1 - P3 are useless and can be removed.
Large port engines idle in columns N3 - N5. So they also can be rescaled.
It is easy to do but when you do it to the Settings 3, do not forget to also do it to:
INJ ADJ, IGL, IGT, and Base Map.
Large port engines idle in columns N3 - N5. So they also can be rescaled.
It is easy to do but when you do it to the Settings 3, do not forget to also do it to:
INJ ADJ, IGL, IGT, and Base Map.
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
Mrmatt3465
Interior / Exterior / Audio
8
09-17-15 01:28 PM
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM