RuffRx7

Hey guys,

Im looking for a base map to start my tuning for run in.

My mods as follows:

Aggressive Street Port
2mm Power Seals
Lightened and balanced rotors
Single turbo GT45 exhaust housing 1.05
Boost will be 0.5bar (8psi)
Tial BOV
50mm wastegate
850 primary
1680 secondary
Stock coils, 9 heat range plugs all round
7 bar Upgraded fuel pump with rewire, FPR set to 3bar
FMIC
Copper radiator
Manual Boost controller
100mm Downpipe, rest of exhaust 76mm with no cat.
Stock map sensor

Anything else that would be required please let me know.

my email addy is: james.ruff.ryder@gmail.com

Any help would be appreciated, I will be tuning with a AFR, just looking for a good starting point.

NicNo1

Did you get it?

RuffRx7

I received a map for a GTX35 with same size housing and motor specs but if you have one that has same specs as my motor with a GT45 that would be great.

NicNo1

No sorry... but i search for tge map for an gt3582r. Can you help me?

Which fuel pressure you have adjust?

NicNo1

Oh sorry i see you have 3 bar fuel pressure...

You had tested the map with your setup?

RuffRx7

I havent tested yet, just waiting for new mani fold and down pipe.

NicNo1

Can you send me this map?

RuffRx7

PM me your email address will send it to you.

NicNo1

I have send a PM ;-)

NicNo1

I tested your map today... but it is for 550ccm primary injectors... i think this is a problem. Okay my engine is stock. Stock seals, stock port. But the engine runs to fat. Also the engine goes out at idle