This is a FD3S with the Power FC and a Dynatek CDI...

enjoy the videos


(1)
http://www.youtube.com/watch?v=JwnCJyWjubY
(2)
http://www.youtube.com/watch?v=cwu7oJbCIwM
(3)
http://www.youtube.com/watch?v=aNTfyzeRBfc


This car already made 10.72@130MPH 1.53@60' with Hoosier drag Radial
Car Fully Built.

 

thats sick!

 

Nice, this was done through the Dynatek I assume?

 

Yes...

 

this was before Dynatek, kind of hard to keep revs@7500 for launch


10.79 pass
http://www.youtube.com/watch?v=fYQhGWmjYKE

10.72 pass
http://www.youtube.com/watch?v=GMUvlj7ypmg

Dynatek still not tested on track.

 

Nice

How much boost does it build on the 2 step

 

are you running 1 dynatek module on all plugs or just on the leading??

ive got 1 that ran on my old microtech on the leading spark but not sure if ill use as ive gone to a haltech ps1000 with 4 AEM 103mj spec coils..

Anyone using the DYnatek on a haltech?

 

or run a BeeR

 

9psi so far with a BorgWarner S480

 

One for leading and one for traling and you can use the Dynatek on any ECU.
just set Dwell to 3.5ms and make sure ignition signal is raising or falling and set it on the Dynatek.

hope this works

 

Dynatek still not tested on track.[/quote]


Nice Work, I have the same box’s I’m wiring up. Do post up when you’ve made a few passes with the Dynateks.
<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>

 

Nice Work, I have the same box’s I’m wiring up. Do post up when you’ve made a few passes with the Dynateks.
<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>[/QUOTE]

We will not be able to post on testing the Dynatek with the PowerFc on the track, The Owner decided to go for the EMS R-Tech. We are now installing the R-Tech to get the car ready for this Drag Racing Season.

But I can share that we made 10.5Psi of boost with the 2-step on the last setup.

Last Setup was:

Turbo BorgWarner S480T4
FMIC
Apex'i Power FC
Dynatek ARC-2
Street Port

Regards, BladeTech

PS: WIll be posting of this car again in the Single Turbo Area.

 

Was this with retarded timing or just the 2 step limiter?