don't worry I just pulled the engine tonight, I have a lot planned for this winter!

any work done?

yea the car is disassembled and at the paint shop right now. Im working on replacing all the gaskets and cleaning up the engine.

Its that a universal radiator? Or is it a car specific?

its for a 240sx with a ka, the necks are on the same side as rb radiator

Thank god You changed the Subframe Id bet that if you were to slide in to a curb or take a hard enough hit You would shear those long bolts right off

Pretty Sick I love the sound of an Rb even tho i'd never swap one in I prefer the 1jz its much cheaper here in canada I can get a Complete swap Out of a front clip for about $2gs the rb25/6 got for much more than that

my front clip was 3k, im happy how it is turning out even though i had to go through so much work and money to get it were it is now

Holy shit; I can't believe I'd not seen this until now.

I hope that you've redone every inch of work (and exhaust) that was under that car when the subframe was reworked. I've seen some ghetto work before, but, wow, words fail.

At least the new stuff you've pictured is, better. I don't know that I'd say "great" but, definitely better.

Good luck with your plans with it. A few more drafts and you might actually have something.

bad cell phone pics, better pics will be up soon...

yea it was pretty bad, the car has completly changed though.

Good to hear. I like the concept. Looks like the execution is catching up with the idea.

yea ill have updated pics when the car gets back from paint!

Attachment 706390
Attachment 706391
Attachment 706392
Attachment 706393
Attachment 706394
Attachment 706395
Attachment 706396

Attachment 706397

Attachment 706398
Attachment 706399
Attachment 706400
Attachment 706401

Attachment 706402
Attachment 706403
Attachment 706404
Attachment 706405
Attachment 706406
Attachment 706407
Attachment 706408
Attachment 706409
Attachment 706410
Attachment 706411
Attachment 706412
Attachment 706413

Where did you get those RE CF light surrounds? Are they for the EVO-R kit or the RE-A kit?

Im not really sure what kit they are for. I bought them on ebay for like $250. My light kit is all peiced togeather and the fitment is not as good as I would like. Im going to sell the whole kit and by something else eventually.

I did the same project lots of work

Another RB25 RX-7! Have you got a thread on this? I want to do an RB26 one.. I am sure I will get plenty of stick for it! It has only been done twice that I can find and guess it is a bit more of a mission to do! But hey.. That's the fun! I have been following this thread on and off and fair play to you buddy..
What did you do on the electrics/ECU side.. I don't remember reading anything about that. Was it hard?

Keep up the work.
Lee

Looks like a interesting and time consuming build. All in all, good job on being patient with it. What color you painting it, and what are you doing to the motor now?

looking good

The wiring was not that bad, Im running a power fc. I still don't have my factory gauges hooked up though. I need to by a converter from dakota digital.

Im painting it a house of kolor white. Right now im replacing all the engine bolts with arp bolts and upgrading all the gaskets. Im also painting the block, head, and powder coating most of the parts candy apple red.

I will have pics of the motor and the car all painted when I move in my new house here in a month or so.

?

other then your lights I think your car looks pretty good. Do the rb26 valve covers fit right up on a rb25?

Just wondering; does the rb pull pretty hard in the fd??? im picking up my mounts, aluminum driveshaft+ a bunch of other parts for my swap this upcoming weekend. and also picking up my series 2 rb25 this weekend. pretty damn excited to start in on the swap