A little help needed for wiring Aristo 2JZ-GTE for '89 FC
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Feb 2013
Location: Pittsburgh
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
A little help needed for wiring Aristo 2JZ-GTE for '89 FC
Hello all!
My name is Chris and I am on here for my buddy who picked up an '89 RX7 FC and is swapping a Aristo 2jz-gte motor in. It has already been test fitted etc. and he, along with myself, are quite knowledgable on "wrenching" on these motors as He has had a Supra in the past and this is the same motor i swapped into my previous IS300.
Anywho, my question is one he asked me to check out on the forums here while I am at work (haha). He wants to know "what wires to hook up to get the 2J to start". I know, that is very vauge, but if anyone has done this swap before and would like to shoot me an answer besides "all of them" he and I would appreciate it haha or lead me to a detailed build thread with this platform.
Hope all is well out there in RX7 land as this brand and model is completely new to me but im loving the setup these cars have. Hopefully be posting some pics on here of the build as it goes. Would like to be up and running by end of April/beginning of May with only working on it on the weekends when we both are free.
My name is Chris and I am on here for my buddy who picked up an '89 RX7 FC and is swapping a Aristo 2jz-gte motor in. It has already been test fitted etc. and he, along with myself, are quite knowledgable on "wrenching" on these motors as He has had a Supra in the past and this is the same motor i swapped into my previous IS300.
Anywho, my question is one he asked me to check out on the forums here while I am at work (haha). He wants to know "what wires to hook up to get the 2J to start". I know, that is very vauge, but if anyone has done this swap before and would like to shoot me an answer besides "all of them" he and I would appreciate it haha or lead me to a detailed build thread with this platform.
Hope all is well out there in RX7 land as this brand and model is completely new to me but im loving the setup these cars have. Hopefully be posting some pics on here of the build as it goes. Would like to be up and running by end of April/beginning of May with only working on it on the weekends when we both are free.
#2
Can Post Only in New Member Section
Thread Starter
Join Date: Feb 2013
Location: Pittsburgh
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Ok, update on what is needed here...
He has a ECU pinout already. He is interested in what wires he needs to hook to the body plugs on the rx7 from the 2jz wiring. Just cant find any body plug info for this swap.
There is 3 plugs on the passanger side kickpanel and he thinks one is a relay. The other two he needs info on. Pinout if possible.
Anyone?
He has a ECU pinout already. He is interested in what wires he needs to hook to the body plugs on the rx7 from the 2jz wiring. Just cant find any body plug info for this swap.
There is 3 plugs on the passanger side kickpanel and he thinks one is a relay. The other two he needs info on. Pinout if possible.
Anyone?
Last edited by chriseffcee; 02-26-13 at 03:48 PM.
Thread
Thread Starter
Forum
Replies
Last Post
befarrer
Microtech
3
08-22-15 05:52 PM