2jz FC
#26
2jz'd fc
Thread Starter
iTrader: (24)
Join Date: Jun 2005
Location: Washington- bellingham
Posts: 1,266
Likes: 0
Received 1 Like
on
1 Post
heading to the shop this weekend, sold the v8 car so i just ordered
-rps stage 3 6puck clutch able to hold 730ftlb trq
-titian motor sport 272 cams (pretty ******* big)
-BC springs and retainers for the bigger cams
-titian motor sport fuel rail kit
-ffwd connections 1050cc injectors
plan for the weekend is to swap oil pans and just put the manual trans on with no clutch for mock up, maybe stick it in the car and start the mock up process
-rps stage 3 6puck clutch able to hold 730ftlb trq
-titian motor sport 272 cams (pretty ******* big)
-BC springs and retainers for the bigger cams
-titian motor sport fuel rail kit
-ffwd connections 1050cc injectors
plan for the weekend is to swap oil pans and just put the manual trans on with no clutch for mock up, maybe stick it in the car and start the mock up process
#29
KILL KILL KILL
iTrader: (-1)
Join Date: Sep 2006
Location: NAS Whidbey Island, WA
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
you should give us a lil explanation of your wiring conversion. ive researched and from my understanding all you gotta do is splice the jz harness with your charging harness and extend the whole thing. is that what you did?
#30
2jz'd fc
Thread Starter
iTrader: (24)
Join Date: Jun 2005
Location: Washington- bellingham
Posts: 1,266
Likes: 0
Received 1 Like
on
1 Post
actually i havent even looked into the wiring, theres a guy here in town with a 1jz rx so i was gonna see what he did, all im thinking it intails is just adding the 12v constant, 12v ing, few grounds and what not. thats really all i had to do with my FI 302 swap.
#31
2jz'd fc
Thread Starter
iTrader: (24)
Join Date: Jun 2005
Location: Washington- bellingham
Posts: 1,266
Likes: 0
Received 1 Like
on
1 Post
time for pics, 1) what it looked like when i got it, 2) maifolds off, 3) shot of the work area, 4) found enough bolts to secure it to the stand, 5) r154 trans with 1j bellhousing
#32
2jz'd fc
Thread Starter
iTrader: (24)
Join Date: Jun 2005
Location: Washington- bellingham
Posts: 1,266
Likes: 0
Received 1 Like
on
1 Post
and more. 1) front sump pan off just checking out the internals, 2) rear sump on, 3,4) just shots of the car. will be working on it all week hopefully. more pics to come
#33
i finished my 1jz swap about 1 year to 2 years ago, i opted the 1jz mainly for ease of install. i talked to scotiegnx on v8rx7 forum and he is a drag car... runs factory hood with some cutting under neath, says he has a 3/4" spacer. i did not want to run spacers so i went ahead with the 1jz. i skipped the factory wiring and just went straight to standalone. I'm very happy with it.
i have a extremely nice 91 shell, that im going to be droping in another 1jz thinking possibly going to try a vvti.
good luck, and enjoy drving it, i've been so happy with everything about the swap. 300 at the wheels bone stock is nice
i have a extremely nice 91 shell, that im going to be droping in another 1jz thinking possibly going to try a vvti.
good luck, and enjoy drving it, i've been so happy with everything about the swap. 300 at the wheels bone stock is nice
#34
2jz'd fc
Thread Starter
iTrader: (24)
Join Date: Jun 2005
Location: Washington- bellingham
Posts: 1,266
Likes: 0
Received 1 Like
on
1 Post
some parts that came, my pressure plate and disk also came but i had some wrong iformation so i have to send it back cause i got a 7m "full clutch set" just needed the 7m turbo disk not the pressure plate so hopefully the company will let me exchange the pressure plate for the 1j/2j one, luckly im not needing my clutch installed yet lol.
gonna pull the head off tomorrow and have my buddy that works at a engine rebulding shop stick it on the line and have it surfaced for me in exchange for making his raidiator shround for the crx you see in the pics beside my 7. im also gonna be drawing up some prints of the lower intake gasket and maybe the upper as well so i can machine out nice aluminum flanges for the intake manifold im gonna make (trying to copy the hypertune one) cause i dont wanna shell out the 2-3k for one when i can make one for free at work to my specs
gonna pull the head off tomorrow and have my buddy that works at a engine rebulding shop stick it on the line and have it surfaced for me in exchange for making his raidiator shround for the crx you see in the pics beside my 7. im also gonna be drawing up some prints of the lower intake gasket and maybe the upper as well so i can machine out nice aluminum flanges for the intake manifold im gonna make (trying to copy the hypertune one) cause i dont wanna shell out the 2-3k for one when i can make one for free at work to my specs
#37
2jz'd fc
Thread Starter
iTrader: (24)
Join Date: Jun 2005
Location: Washington- bellingham
Posts: 1,266
Likes: 0
Received 1 Like
on
1 Post
sending back the 2j flywheel and getting a 1jflywheel.
heres some pics
i got the front cover and valve covers off but did pull the head off yet..didnt have the right tools.
had the middle tray thats in between the block and the oil pan powdercoated from a local guy that deals with my work
the pic of the tray is to large to upload i guess..sorry
heres some pics
i got the front cover and valve covers off but did pull the head off yet..didnt have the right tools.
had the middle tray thats in between the block and the oil pan powdercoated from a local guy that deals with my work
the pic of the tray is to large to upload i guess..sorry
#39
2jz'd fc
Thread Starter
iTrader: (24)
Join Date: Jun 2005
Location: Washington- bellingham
Posts: 1,266
Likes: 0
Received 1 Like
on
1 Post
hey thanks man, im also in process of getting my self a 2j na motor to stick in one of the other shells i have for a great dd car, same mount set up so why not.
went out to the shop today after work, had the right tool to take the head bolts out this time so i poped off the head. my roommates gonna try and get it done for me in the next few weeks so ill be at a slight stand still untill it comes back.
went out to the shop today after work, had the right tool to take the head bolts out this time so i poped off the head. my roommates gonna try and get it done for me in the next few weeks so ill be at a slight stand still untill it comes back.
#40
Full Member
Join Date: Jan 2010
Location: indinapolis In
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
whenever u get some mock up pics id like to see it setting in car, and subframe setup im currently getting parts to start my 2j fc build and just trying to figure out clearance adn how hard it would be to make the crossmembers
#41
2jz'd fc
Thread Starter
iTrader: (24)
Join Date: Jun 2005
Location: Washington- bellingham
Posts: 1,266
Likes: 0
Received 1 Like
on
1 Post
yeah there will be pics for sure... so ******* ACT will not take the flywheel back so im out a **** ton of money fml. gonna put it on ebay and take a loss i guess
#45
2jz'd fc
Thread Starter
iTrader: (24)
Join Date: Jun 2005
Location: Washington- bellingham
Posts: 1,266
Likes: 0
Received 1 Like
on
1 Post
still waiting for the machine at work to be fixed then my head will be done, side note im starting a ford 4.6L swap with PI heads and intake, along with forged pistions. this will be another garage swap.
#46
2jz'd fc
Thread Starter
iTrader: (24)
Join Date: Jun 2005
Location: Washington- bellingham
Posts: 1,266
Likes: 0
Received 1 Like
on
1 Post
my heads finially being done....woooo. some more parts that i got, billit 1jz flywheel along with everything that goes in the trans (had no tb, fork, or mounting braket for the fork lol).
some stuff on the way, unorthodox racing cam gears, kevlar timing belt, usdm water pump.
my head should be done by next week and then i can start putting it all back together...or while i have the bottom end exposed should i do a ring job? suggestions welcome
gonna media blast my valve covers at work and add some -10an fittings and have them powder coated black probably, i made the catch can at work just gotta get the fittings and weld it up
some stuff on the way, unorthodox racing cam gears, kevlar timing belt, usdm water pump.
my head should be done by next week and then i can start putting it all back together...or while i have the bottom end exposed should i do a ring job? suggestions welcome
gonna media blast my valve covers at work and add some -10an fittings and have them powder coated black probably, i made the catch can at work just gotta get the fittings and weld it up
#49
2jz'd fc
Thread Starter
iTrader: (24)
Join Date: Jun 2005
Location: Washington- bellingham
Posts: 1,266
Likes: 0
Received 1 Like
on
1 Post
$1300 for the motor and it came with uncut wiring harness and auto trans, bought a rear sump oil pan set up for $100, then got a r154 trans with a 1j bellhousing for $500