Would this car be Fast?
07-01-02, 10:50 AM
#3
Full Member
Thread Starter
Join Date: Apr 2002
Location: Manassas, VA
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Yes it does, kind of neat though.
Believe it or not it is a KIT car called ATTACK.
It costs about 15k plus engine and trans or 25k turnkey.
Check it out: http://www.k1-styling.sk/default2.htm
Believe it or not it is a KIT car called ATTACK.
It costs about 15k plus engine and trans or 25k turnkey.
Check it out: http://www.k1-styling.sk/default2.htm
07-01-02, 11:21 AM
#4
I'm not a Midget!
Join Date: Feb 2001
Location: Westminster, MD, USA
Posts: 738
Likes: 0
Received 0 Likes
on
0 Posts
1870lbs seems a bit heavy.
A 13B n/a ported and running about 225 hp would give you about 8.3 lbs/hp (close to a Viper). But if the car was say...1500lbs, you would get 6.6 lbs/hp
Build light - it is cheaper than hp!
Oh yeah, that car is bad *** looking!
A 13B n/a ported and running about 225 hp would give you about 8.3 lbs/hp (close to a Viper). But if the car was say...1500lbs, you would get 6.6 lbs/hp
Build light - it is cheaper than hp!
Oh yeah, that car is bad *** looking!
Trending Topics
10-10-02, 05:51 PM
#8
Rotary Freak
Join Date: Aug 2001
Location: maryland
Posts: 1,734
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by RX-Midget
1870lbs seems a bit heavy.
A 13B n/a ported and running about 225 hp would give you about 8.3 lbs/hp (close to a Viper). But if the car was say...1500lbs, you would get 6.6 lbs/hp
Build light - it is cheaper than hp!
Oh yeah, that car is bad *** looking!
1870lbs seems a bit heavy.
A 13B n/a ported and running about 225 hp would give you about 8.3 lbs/hp (close to a Viper). But if the car was say...1500lbs, you would get 6.6 lbs/hp
Build light - it is cheaper than hp!
Oh yeah, that car is bad *** looking!
Can you say 3.8lbs/hp on the street and 2.9 lbs/hp when you crank it up.
Can you say supercar?
10-10-02, 11:00 PM
#10
Full Member
Join Date: Apr 2002
Location: new hampshire, middleton(a town so small we have no conveince stores)
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
i want i want, i dont think you could put the 13b in cause of the tranny, think about it... i dont care if its a honda motor, with good work done to it, like real mods, that car would fly,
--joe
--joe
10-13-02, 11:05 PM
#12
03 Cobra Killer
Join Date: Jan 2002
Location: All Over
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
hahah, if I remember correctly from reading the site a few months ago, that car USED to be an Accord!!! 
YUP, went back to the site, goto: http://www.k1-styling.sk/index.html
says "the open roadster based on Honda Accord 1990-96 (1990-93 recommended)"
K
YUP, went back to the site, goto: http://www.k1-styling.sk/index.html
says "the open roadster based on Honda Accord 1990-96 (1990-93 recommended)"
K
Last edited by nocab72; 10-13-02 at 11:09 PM.
10-17-02, 08:57 AM
#14
Full Member
Join Date: Jan 2002
Location: Port Orchard, Washington
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
How about a 1800lb "Kit Car" with a TurboII of 250+ hp. It took me three years to build(rebuild) it. Its a 1979 Kelmark GT and in 1st & 2nd gear at half throttle it want to bring the front end off of the ground!(I'm adding more weight in front!) I've won three trophys at car shows(3 car shows), and still need to finish the interior completely.
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
josef 91 vert
2nd Generation Specific (1986-1992)
23
09-03-15 11:20 AM
KAL797
Test Area 51
0
08-11-15 03:47 PM
