The wiring harness in the manual calls for a single wire sending unit. This is the one that mounts in the water pump housing. Has anyone found one at a parts store? Does anyone know if the early rx7's had a single wire connection?

-billy

 

Yes the early rx7's have a single wire but they are under the oil pressure sending unit and have a different restance. I had to go to radio shack and get a couple of different resistors till I found the one that matched my water temp when I installed a 13b in my rx2.

 

Can please check the color code of the starter wire. This is the thin wire that goes to the starter's solenoid. I cleaned out my RX-2's wiring harness and accidentally cut several wires from the rear harness but didnt realize it until tonight.

Thanks

 

It has always been a black with yellow stripe.

-billy

 

thanks for the info.