Still a rotary!
#1
sLOWer than you...
Thread Starter
Join Date: Jan 2008
Location: New Orleans
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
#5
Senior Member
these utes were cool before EVERYONE started building them! Me and my mates built the first 13b Turbo van, the first 13b FWD mazda 323 etc etc.
I really wish people over here would get some new ideas with what to drop a rotor in next,
honda civic - done
Mitsi Libero - done
subaru wrx - done
toyota vans,utes, DX's corollas, altezza's - all done
mazda vans, utes and anything else with a mazda badge on it - done
ford cortina - done
Holden commodore - done (with 20b)
Lamboughini countach (kit car) - currently in the build with 20b
Ferrari F40 (mr2 conversion) - currently on the cards after the lambo
I could go on all day........
Here is an idea give me a car brand and I will let you know if it's been done before, that i know of.
Dont get me wrong, im not a hater I would just like to see some original stuff coming up like the 1993 toyota corona I stumbled accross last night, has a 13b fwd set up in it, very cool.
here is the link:
http://www.trademe.co.nz/Trade-Me-Mo...-136034454.htm
I really wish people over here would get some new ideas with what to drop a rotor in next,
honda civic - done
Mitsi Libero - done
subaru wrx - done
toyota vans,utes, DX's corollas, altezza's - all done
mazda vans, utes and anything else with a mazda badge on it - done
ford cortina - done
Holden commodore - done (with 20b)
Lamboughini countach (kit car) - currently in the build with 20b
Ferrari F40 (mr2 conversion) - currently on the cards after the lambo
I could go on all day........
Here is an idea give me a car brand and I will let you know if it's been done before, that i know of.
Dont get me wrong, im not a hater I would just like to see some original stuff coming up like the 1993 toyota corona I stumbled accross last night, has a 13b fwd set up in it, very cool.
here is the link:
http://www.trademe.co.nz/Trade-Me-Mo...-136034454.htm
#6
Registered shy guy
iTrader: (1)
Join Date: Jul 2007
Location: tewksbury, ma
Posts: 1,436
Likes: 0
Received 0 Likes
on
0 Posts
hey if my and my buddys 84 rs turbo capr sohc gets beat by a honda after we throw a volvo dohc head on it (should make around 500 hp) my buddy told me he wants to try to get a 20b for the car lol. hope fully it wount have to come to that but i think it would be the only capri with a 20b.
#7
Eats, Sleeps, Dreams Rotary
Join Date: Jul 2004
Location: Allentown, PA - Paterson, NJ
Posts: 3,247
Likes: 0
Received 2 Likes
on
2 Posts
Yea I dont think they were trying to showi off a "new idea" as this has been done many times before. My buddy currently has a B series w/ a 12a in it (doesnt look nearly as nice). Its the details and all the work invoved that makes this truck stand out....and of course the power plant.
Last edited by Latin270; 01-18-08 at 06:16 AM.
Trending Topics
#11
Double Dose
iTrader: (1)
Centrifugal superchargers... it almost appears to be a combination of supercharger and turbo cuz there are no belts connected to the turbo and it has an exhaust housing. Centrifugal superchargers have no exhaust housing nor do they have exhaust running thru them... And there is a downpipe comin off the turbo. I believe he's running a sc and turbo from the look and sound of it
#12
Senior Member
it is Turbo, not supercharged, the size and sound of the belts are from a gilmour drive pulley set, sound like a super charger but not, they are just a bolt on pully kit that looks way cooler than the stock. I am gutted they dont make them for FD's this mod is very common over here in NZ, finishes off the engine nicely.
#14
nother rican witha rotary
Join Date: Mar 2002
Location: S.Otown
Posts: 1,034
Likes: 0
Received 0 Likes
on
0 Posts
these utes were cool before EVERYONE started building them! Me and my mates built the first 13b Turbo van, the first 13b FWD mazda 323 etc etc.
I really wish people over here would get some new ideas with what to drop a rotor in next,
honda civic - done
Mitsi Libero - done
subaru wrx - done
toyota vans,utes, DX's corollas, altezza's - all done
mazda vans, utes and anything else with a mazda badge on it - done
ford cortina - done
Holden commodore - done (with 20b)
Lamboughini countach (kit car) - currently in the build with 20b
Ferrari F40 (mr2 conversion) - currently on the cards after the lambo
I could go on all day........
Here is an idea give me a car brand and I will let you know if it's been done before, that i know of.
Dont get me wrong, im not a hater I would just like to see some original stuff coming up like the 1993 toyota corona I stumbled accross last night, has a 13b fwd set up in it, very cool.
here is the link:
http://www.trademe.co.nz/Trade-Me-Mo...-136034454.htm
I really wish people over here would get some new ideas with what to drop a rotor in next,
honda civic - done
Mitsi Libero - done
subaru wrx - done
toyota vans,utes, DX's corollas, altezza's - all done
mazda vans, utes and anything else with a mazda badge on it - done
ford cortina - done
Holden commodore - done (with 20b)
Lamboughini countach (kit car) - currently in the build with 20b
Ferrari F40 (mr2 conversion) - currently on the cards after the lambo
I could go on all day........
Here is an idea give me a car brand and I will let you know if it's been done before, that i know of.
Dont get me wrong, im not a hater I would just like to see some original stuff coming up like the 1993 toyota corona I stumbled accross last night, has a 13b fwd set up in it, very cool.
here is the link:
http://www.trademe.co.nz/Trade-Me-Mo...-136034454.htm
#15
Senior Member
you can, here is the link. Not sure if you can get them on the US ebay but here you go.
http://www.trademe.co.nz/Trade-Me-Mo...-136276110.htm
http://www.trademe.co.nz/Trade-Me-Mo...-136276110.htm
#18
sLOWer than you...
Thread Starter
Join Date: Jan 2008
Location: New Orleans
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
mazdatrix has some i think.....*edit tweakit.net has it*
I like that truck how it is, even the black tuner wheels. I am doing mine very similar. Except mine is red, and single cab. I'm also not going to do the gauges like he did, mine will be WAY more subtle and different. I want to get good power from my engine, but I am told to be careful with the mods to the N/A 13b. I was thinking of going turbo, but IDK, as there's a nice supercharger setup out there as well. Either way, I wont put my FMIC like he did his. Thats pretty much the ONLY thing I dont like about that truck...
I like that truck how it is, even the black tuner wheels. I am doing mine very similar. Except mine is red, and single cab. I'm also not going to do the gauges like he did, mine will be WAY more subtle and different. I want to get good power from my engine, but I am told to be careful with the mods to the N/A 13b. I was thinking of going turbo, but IDK, as there's a nice supercharger setup out there as well. Either way, I wont put my FMIC like he did his. Thats pretty much the ONLY thing I dont like about that truck...
Last edited by mazdamn; 01-18-08 at 09:57 PM.
#19
Registered shy guy
iTrader: (1)
Join Date: Jul 2007
Location: tewksbury, ma
Posts: 1,436
Likes: 0
Received 0 Likes
on
0 Posts
camden (did i spell that right) makes superchargers that bolt on. there old school draw thru so no intercooler.
or you could try to make your own on the cheap. http://www.gatorsuperchargers.net
or you could try to make your own on the cheap. http://www.gatorsuperchargers.net
#22
Eats, Sleeps, Dreams Rotary
iTrader: (1)
They fit 12a and 13b. Here's mine on my bridgeport 12a. Be willing to spend about 380.00 bucks as you have to get them from Australia.
http://www.youtube.com/watch?v=jQygbNzo114
http://www.youtube.com/watch?v=jQygbNzo114
#23
sLOWer than you...
Thread Starter
Join Date: Jan 2008
Location: New Orleans
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
IS that what gives it that 'whine' sound as if it were supercharged? Sounds bad ***. Here's my thing, I have a 100% stock 13b from an '88. Would it be best to keep it fuel injected, or should I convert it to carb? If I go carb, would I still need to get an ECU and wiring harness? (which I dont have yet) Whats the rough pricing on converting it to carbd? Wondering because I wanna have it setup with good power, and reliability for when I first start driving the truck. Keep in mind I will also do a racing suspension (coilovers and 4 link) so I can track it, and keep the ride where I like it....low.
Thread
Thread Starter
Forum
Replies
Last Post
datfast1
Old School and Other Rotary
18
06-20-19 10:53 PM
Under PSI
3rd Generation Specific (1993-2002)
19
09-23-15 11:47 PM