Old School and Other Rotary Old School and Other Rotary Powered Vehicles including performance modifications and technical support

Slow start

Thread Tools
 
Search this Thread
 
Old 04-29-09, 01:58 PM
  #1  
Full Member
Thread Starter
 
jgkiller13's Avatar
 
Join Date: Feb 2008
Location: Los Angeles
Posts: 95
Likes: 0
Received 0 Likes on 0 Posts
Slow start

So I've been having trouble starting my car lately. It's sort of a 50/50 shot that it starts normally while the other time it's slow to turn over. The battery is brand new but it just seems like it's not giving me enough juice to start the car. When I switched the battery to my other car it started just fine, so I know it's not the battery. Could it be my starter or ignition????? Any help would be appreciated. Thanks.
Old 04-29-09, 11:02 PM
  #2  
Eats, Sleeps, Dreams Rotary

iTrader: (1)
 
ultimatejay's Avatar
 
Join Date: Nov 2006
Location: California
Posts: 4,148
Likes: 0
Received 2 Likes on 2 Posts
First check and make sure you have a good ground and that both your positive and negative cables are in good condition. After those check out ok, then make sure your getting 12v to the large battery cable to the starter and also 12v to the starter solenoid (small wire) when the key is turned on. If that all checks out and you still have problems then most likely your starter is going out.
Old 04-30-09, 05:13 PM
  #3  
Full Member
Thread Starter
 
jgkiller13's Avatar
 
Join Date: Feb 2008
Location: Los Angeles
Posts: 95
Likes: 0
Received 0 Likes on 0 Posts
Checks out

Yeah, everything checked out ok. I guess I'll go pick up a starter this weekend. Thanks jay. Hey do they still do the 1/8 in irwindale???? What days?? thx
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
5
09-12-15 12:22 PM
whinin
New Member RX-7 Technical
10
09-05-15 11:52 PM
gabescanlon
3rd Generation Specific (1993-2002)
7
09-05-15 12:09 AM



Quick Reply: Slow start



All times are GMT -5. The time now is 02:22 PM.