I think I took too much time off from the rotary project, I'm a little out of touch. I need some parts and wanted to get your advice on the best place(s) to get them.

I need:
2 x big secondary injectors like1680cc injectors and secondary rail to hold them.
Turbo oil feed line from the hole in front iron of my 13B Cosmo motor to my journal bearing T4 turbo.

Thanks

 

wow those are big injectors. Try RC engineering, that's where I got mine from.. but mine are only 1000cc. The turbo feed line you can pick them up at a local speed shop, if I remember correctly its a -2 line just make sure the the threaded ends match the iron. I'm using a stock fuel rails for mine, but I do have one aftermarket that I purchase here. Just cant seem to remember who I got them from. I'll have to dig it up and see the stamp on the rail.

 

Nice call. RC has injectors for an FC application that should drop in the stock rail. I currently have stock 4 x 550cc injectors. I used the KGparts injector calculator and found changing 2 for 1200cc will give ~450hp at flywheel 80%dc using 0.6bsfc. 1680cc injectors would be overkill, since they support 400hp on their own.