DoughRoller

i'm curious on how hard a 13b swap is in a miata? if any infomation on this swap could i get some please. thank you.

stevensimon

iTrader: (11)

its not too terribly tough.. there is a guy 'nev' something on the miata boards and i belive he is here too that is running a 13b with itb's in an nb.

MRJACK$ON

iTrader: (1)

As said above its not toooo hard,look up,Lucky 7 racing they have had one completed for a while now.And you can search on speed hunters.com there is a feture of another one on there

cfamilyfix

iTrader: (15)

You can hit up rx7vargas in VA...he seems to know his stuff...not much info on his build in this thread, but a miata to inspire nontheless...


https://www.rx7club.com/old-school-other-rotary-63/my-rotary-miata-929490/

joebowhunter

My uncle and I are doing one right now, if you scroll down the page a bit you will see it. I can tell you this there is a lot of custom fabricating to be done and if you want to make it easy on yourself, get a carb model lol

fbse7en

Just do it. Swapping a rotary into anything is nothing but...WIN.

rx7vargas

iTrader: (3)

Its really not that hard what i did was i bought a gslse front cover and oil pan and made the mounts on the front more room to mess around, i cut the oil pan and did some simple mods. As for the transmission i modified the fb mounts and welded up brackets. Drive shaft had to be cut around 3 inches i used one from a 12a fb it fits perfect on the diff.

rx7vargas

iTrader: (3)

Just message me if you have more questions