Hello, just trying to get a little info on tranny adapters...

Okay...let's say I was going to swap a 13b into a 240sx...I'd like to keep the 240'sx transmission so I don't have to get a custom driveshaft/tranny mount made. My concern is...would I have to get a custom flywheel, clutch, t/o bearing, etc.

 

custom drive shaft may be easy compaired to a adapter

 

YOUR WAY BETTER OFF WITH A 5 SPD AND A DRIVE LINE MIGHT NOT HAVE TO DO ANYTHING. THERE LOST OF ROOM WITH THE STOCK RAD MOVED

 

I figured it would be....Thanks for confirming my suspicions