My 73 rx3 work in progress
#201
I actually own Rotaries
Thread Starter
iTrader: (40)
The following users liked this post:
mazdagirl76 (09-25-22)
#202
I actually own Rotaries
Thread Starter
iTrader: (40)
#205
I actually own Rotaries
Thread Starter
iTrader: (40)
The following users liked this post:
mazdagirl76 (09-25-22)
#206
I actually own Rotaries
Thread Starter
iTrader: (40)
sorry
its been a while since i have posted an update but progress is still being made... i took the Epsilons apart and the polishing has begun... the centers are at the powder coater getting a nice coat ob black.... i got all new stainless hardware also... i think there gonna be SWEET!!!!!
The following users liked this post:
mazdagirl76 (09-25-22)
#207
I actually own Rotaries
Thread Starter
iTrader: (40)
my eppsilon's after polish and powder coating
how do they look
The following users liked this post:
mazdagirl76 (09-25-22)
#209
I actually own Rotaries
Thread Starter
iTrader: (40)
slowly moving foward
I have been working mostly on the interior and restoring the epsilons... here is some pics... i have new kick panels made and ready to go in. I am in the middle of putting the freshly covered dash pad( which turned out really good). Right now time is my biggest problem(i have none)
The following users liked this post:
mazdagirl76 (09-25-22)
#212
I actually own Rotaries
Thread Starter
iTrader: (40)
update
got the front glass in.... brand new from Canada... also got polk 1in tweets custom monted in the factory dash hole... pretty neat
The following users liked this post:
mazdagirl76 (09-25-22)
#213
I actually own Rotaries
Thread Starter
iTrader: (40)
time to test fit the epps(again)
here i have a new set of 195/45/15 but still have a slight scrub issue
The following users liked this post:
mazdagirl76 (09-25-22)
#214
I actually own Rotaries
Thread Starter
iTrader: (40)
few more
scrub shown in pic#7
The following users liked this post:
mazdagirl76 (09-25-22)
#216
Full Member
Do you get a rub on the foot wells with the back side of the tiree as well? That tire sits out lots!
I ran into that, had to make room both on the foot well and that corner of the fender. I just rolled the edge of the fender away and beat back the foot wells tomake room.
Ugly at best, don't need much room to get a way with it, but remember the movement in the suspension. I would get wheel rub any time I was hard on the brakes and turning hard, not that I ever did that much:-)
Be nice to tuck those in a little, would make things easier. How much room do you have between the tire and the shock?
I ran into that, had to make room both on the foot well and that corner of the fender. I just rolled the edge of the fender away and beat back the foot wells tomake room.
Ugly at best, don't need much room to get a way with it, but remember the movement in the suspension. I would get wheel rub any time I was hard on the brakes and turning hard, not that I ever did that much:-)
Be nice to tuck those in a little, would make things easier. How much room do you have between the tire and the shock?
#217
I think it's because you don't have weight in the front and the suspension are actually not on it's normal possition. When I pulled out my motor and transmission I couldn't turn my wheels, but when I put them back it all normal again.
#221
I actually own Rotaries
Thread Starter
iTrader: (40)
yeah, thats stock rx3
just scrubs up front shown in pic&
Thanks
Thanks
Do you get a rub on the foot wells with the back side of the tiree as well? That tire sits out lots!
I ran into that, had to make room both on the foot well and that corner of the fender. I just rolled the edge of the fender away and beat back the foot wells tomake room.
Ugly at best, don't need much room to get a way with it, but remember the movement in the suspension. I would get wheel rub any time I was hard on the brakes and turning hard, not that I ever did that much:-)
Be nice to tuck those in a little, would make things easier. How much room do you have between the tire and the shock?
I ran into that, had to make room both on the foot well and that corner of the fender. I just rolled the edge of the fender away and beat back the foot wells tomake room.
Ugly at best, don't need much room to get a way with it, but remember the movement in the suspension. I would get wheel rub any time I was hard on the brakes and turning hard, not that I ever did that much:-)
Be nice to tuck those in a little, would make things easier. How much room do you have between the tire and the shock?
Thanks
The following users liked this post:
mazdagirl76 (09-25-22)
#222
I actually own Rotaries
Thread Starter
iTrader: (40)
havent thought of that!!! it would be cool if that fixes it... it has the motor and trans in it but nothing else... it is sitting a little higher than normal... we shall see
The following users liked this post:
mazdagirl76 (09-25-22)
#225
Yeah it does look higher that's why I thought you have your motor out... But Bill is right about the stage 1 kit from racingbeat it tend to pull the suspension forward.