my 2nd gen wont shift gears HELP
03-12-07, 02:33 PM
#1
NO PISTONS
Thread Starter
Join Date: Apr 2006
Location: Baltimore, MD
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
my 2nd gen wont shift gears HELP
about a month ago i got a new clutch put in to my rx7. Then the other day when i was driving it i went to go shift and it wouldn't. No matter how much i pressed on the clutch i couldn't shift gears. The master cylinder has fluid in it but whats going on with my car? Can someone help me pleas, and if anyone know a good shop in Baltimore/DC area let me know
03-12-07, 06:57 PM
#2
This is one of the slower sections, you could have posted in the 2nd gen or tech section. Is the clutch pedal sticking to the floor? If so, replace the clutch master, slave and rubber hose. With the age of these cars, the clutch hydraulics often fail after replacing the clutch, particularly with HD pressure plates.
If the pedal stays up, have someone push the pedal and someone watch to see if the plunger is pushing out of the slave. If it is, and travel seems adequate, problem is within the bell housing.
If the pedal stays up, have someone push the pedal and someone watch to see if the plunger is pushing out of the slave. If it is, and travel seems adequate, problem is within the bell housing.
