Jeco Clocks
01-28-13, 07:04 PM
#1
RX7orDie
Thread Starter
Join Date: Sep 2008
Location: Cornville, IL
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Jeco Clocks
Recently I found a cashe of Mazda parts still in the packaging. Most of it was 1st gen RX-7 parts everything from wheel bearings to electric mirrors. However there was 2 exceptions analog Jeco clocks. From what I was told they may go to the Mazda RX-3. Unfortunately they didnt put the greatest part numbers on the parts back then.
The clocks have intrigued me so have been looking for info on them. 1 picture is all have been able to find on the first clock. So now I am turning to my fellow Mazda gurus for help. If you happen to know anything about the clocks listed below I would love to hear from you.
So only 1 was still in the box so I have that part number. 1676-55-7000 is the number on the box. 3081J is number stamped on the back of the clock. The first pic I am including is of this clock.
The other has a tag on it but its in Japanese. My Japanese is too rusty to read it. 4021F is the stamp on the other clock. Apparently it is the second clock...right.
Anyway any input is much appreciated. Thanks Josh
The clocks have intrigued me so have been looking for info on them. 1 picture is all have been able to find on the first clock. So now I am turning to my fellow Mazda gurus for help. If you happen to know anything about the clocks listed below I would love to hear from you.
So only 1 was still in the box so I have that part number. 1676-55-7000 is the number on the box. 3081J is number stamped on the back of the clock. The first pic I am including is of this clock.
The other has a tag on it but its in Japanese. My Japanese is too rusty to read it. 4021F is the stamp on the other clock. Apparently it is the second clock...right.
Anyway any input is much appreciated. Thanks Josh
01-28-13, 08:27 PM
#2
Banned
iTrader: (40)
Looks like an rx3 one to me... wanna sell it?
01-29-13, 09:22 AM
#3
RX7orDie
Thread Starter
Join Date: Sep 2008
Location: Cornville, IL
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
sell
I would probably sell it. After all I dont have an rx-3. Is part of the reason I was trying to get some nfo in them so I knew better what I was selling. Can you tell me anything more about them?
01-29-13, 06:02 PM
#4
Banned
iTrader: (40)
Actually after looking at it again I think its actually for an rx2... the mounting is a little different and the stem is in the wrong spot...
Thread
Thread Starter
Forum
Replies
Last Post
erevos
2nd Generation Specific (1986-1992)
4
09-15-15 09:19 AM
