headlight size
headlight size
Are the headlights ina n rx2 really 6" ?? I cnt find any good replacements in 6" only 7".
Anyone know where to get some upgrade lights for an rx2, mabe the h4 lights or something brighter than the stock weak ones.
Anyone know where to get some upgrade lights for an rx2, mabe the h4 lights or something brighter than the stock weak ones.
http://www.datsunrestore.com/h4_bright_white_kit.html
You have 5and 3/4 for the size and I have halogeon lights in mine from the regular old parts store high beams 50 watts H5001 cannot remember the low beam number. I put the post on top because those lights will work just use the Datsun 510 size. I would get the wiring for conversion from painless since you have some old wiring in our RX2s.
You have 5and 3/4 for the size and I have halogeon lights in mine from the regular old parts store high beams 50 watts H5001 cannot remember the low beam number. I put the post on top because those lights will work just use the Datsun 510 size. I would get the wiring for conversion from painless since you have some old wiring in our RX2s.
http://www.datsunrestore.com/h4_bright_white_kit.html
You have 5and 3/4 for the size and I have halogeon lights in mine from the regular old parts store high beams 50 watts H5001 cannot remember the low beam number. I put the post on top because those lights will work just use the Datsun 510 size. I would get the wiring for conversion from painless since you have some old wiring in our RX2s.
You have 5and 3/4 for the size and I have halogeon lights in mine from the regular old parts store high beams 50 watts H5001 cannot remember the low beam number. I put the post on top because those lights will work just use the Datsun 510 size. I would get the wiring for conversion from painless since you have some old wiring in our RX2s.
http://www.datsunrestore.com/h4_bright_white_kit.html
You have 5and 3/4 for the size and I have halogeon lights in mine from the regular old parts store high beams 50 watts H5001 cannot remember the low beam number. I put the post on top because those lights will work just use the Datsun 510 size. I would get the wiring for conversion from painless since you have some old wiring in our RX2s.
You have 5and 3/4 for the size and I have halogeon lights in mine from the regular old parts store high beams 50 watts H5001 cannot remember the low beam number. I put the post on top because those lights will work just use the Datsun 510 size. I would get the wiring for conversion from painless since you have some old wiring in our RX2s.
I probably have the same ones you do mrmasda, Sylvania's from the local auto parts store, says 5 3/4" on the box. The number was H5001 for high beams and H5006 for the low beams, it should say high or low beam for 4 headlight system on the front. They'll be an improvement over worn out lights, especially if they were incandescents one, but I can't say I was really impressed. I hear the Silvania Silverstars are a really noticable improvement over the regular halogen replacements, but I don't if the make them for older set-ups.
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
Aug 9, 2018 05:54 PM
rx8volks
Canadian Forum
0
Sep 1, 2015 11:02 PM




