Future classic? Mazda HC Luce (929) Turbo-II
#1
Rotary Enthusiast
Thread Starter
Future classic? Mazda HC Luce (929) Turbo-II
I was doing a bit of reading on old-school rotaries and I noticed one that hardly gets any attention – the Mazda Luce (HC) from the late 80s.
A little information:
Club member's 1990 Royal Classic: https://www.rx7club.com/old-school-o...t-auto-508087/
Wikipedia: https://en.wikipedia.org/wiki/Mazda_...86–1991)
Curbside Classic: Curbside Classic: 1986-1991 Mazda 929/Luce ? Aren?t You Supposed To Dress For Success?
Yes, it's a little dowdy on the outside, but check out the digital dash on the Royal Classic! The Japanese HC Luce was rear-wheel drive, had independent rear suspension, and an adjustable suspension. Also, Wiki says it was about 3,000 lbs, which is pretty light by modern standards.
I think one of these, especially as a pillarless hardtop with the rotary 13B Turbo-II and the 5-speed manual, is a prime candidate for a restomod. New wheels, dark windows, upgrade brakes and suspension and add more power (surely a 13B-DEI is capable of more than 185 hp in 2019) and you've got an awesome sleeper or collectible. It's a prime candidate for one of those online or YouTube upgrade projects, especially as it should meet age exemptions for imports.
I'm not sure how many of these are still out there. Hopefully they haven't all gone to the junkyard. This one's a bit much for my taste, but you get the point.
A little information:
Club member's 1990 Royal Classic: https://www.rx7club.com/old-school-o...t-auto-508087/
Wikipedia: https://en.wikipedia.org/wiki/Mazda_...86–1991)
Curbside Classic: Curbside Classic: 1986-1991 Mazda 929/Luce ? Aren?t You Supposed To Dress For Success?
Yes, it's a little dowdy on the outside, but check out the digital dash on the Royal Classic! The Japanese HC Luce was rear-wheel drive, had independent rear suspension, and an adjustable suspension. Also, Wiki says it was about 3,000 lbs, which is pretty light by modern standards.
I think one of these, especially as a pillarless hardtop with the rotary 13B Turbo-II and the 5-speed manual, is a prime candidate for a restomod. New wheels, dark windows, upgrade brakes and suspension and add more power (surely a 13B-DEI is capable of more than 185 hp in 2019) and you've got an awesome sleeper or collectible. It's a prime candidate for one of those online or YouTube upgrade projects, especially as it should meet age exemptions for imports.
I'm not sure how many of these are still out there. Hopefully they haven't all gone to the junkyard. This one's a bit much for my taste, but you get the point.
Last edited by HiWire; 04-29-19 at 06:45 PM.
#3
Rotary Enthusiast
Thread Starter
Yes, it's in a very small niche of interest. I'm guessing there's a lot more information on these cars in Japanese.
The following users liked this post:
HiWire (05-09-19)
#6
Rotary Enthusiast
Thread Starter
Great pic! That's what I'm talking about...
#7
Rotary Enthusiast
Thread Starter
Check out Mad Mike's MADCAB Rotaxi (1987 Luce) for another example of Rotary "luxury":
http://www.speedhunters.com/2017/12/...-drifting-fun/
Catching Up With Mad Mike At The MADLAB - Speedhunters
http://www.speedhunters.com/2017/12/...-drifting-fun/
Catching Up With Mad Mike At The MADLAB - Speedhunters
Last edited by HiWire; 07-03-19 at 01:44 PM.
Trending Topics
#9
Rotary Enthusiast
Thread Starter
Yes, it would be more popular if 1) people knew about it 2) it became available in North America.
I like the stock lines of the Luce, but it could definitely use more "pop" in terms of paint colors and wheel options (and maybe some detailing updates like the grill, the lights, and bumpers).
I'd want one with a street port and maybe 250-350 horsepower – not too loud, and with as much low-midrange torque as possible for street driving and carrying passengers/cargo, running A/C, etc., a reasonable ride height, and some modern sound insulation. In other words, an awesome daily driver without crazy track stuff.
Most people probably wouldn't try to convert the 929 sedan to a rotary – the pillarless hardtop looks better and starting with a rotary and manual transmission is way easier. The main problem would be the RHD layout – as long as you are cool with that and it is legal in your area.
I like the stock lines of the Luce, but it could definitely use more "pop" in terms of paint colors and wheel options (and maybe some detailing updates like the grill, the lights, and bumpers).
I'd want one with a street port and maybe 250-350 horsepower – not too loud, and with as much low-midrange torque as possible for street driving and carrying passengers/cargo, running A/C, etc., a reasonable ride height, and some modern sound insulation. In other words, an awesome daily driver without crazy track stuff.
Most people probably wouldn't try to convert the 929 sedan to a rotary – the pillarless hardtop looks better and starting with a rotary and manual transmission is way easier. The main problem would be the RHD layout – as long as you are cool with that and it is legal in your area.
Last edited by HiWire; 07-14-19 at 09:45 AM.
Thread
Thread Starter
Forum
Replies
Last Post
forced inducted fd dude
General Rotary Tech Support
1
09-17-07 01:03 PM
forced inducted fd dude
2nd Generation Specific (1986-1992)
2
09-17-07 02:37 AM
forced inducted fd dude
Old School and Other Rotary
3
09-17-07 12:02 AM