RoTaRyBoYz

guys im thinking about importing a pair of fenders for my rx2.....its costing me $400-$450 US for the pair, plus i have to pay shipping....think anyone else might be interested in FG parts?, maybe we can share the shipping container and cost?
i can get rx3 12a nose cones, headlight surrounds, rx2 fenders, hoods, and just about any outside panel in FG
BTW these parts are not from Phil's rotary in australia.....its from another guy thats way cheaper than phil...i'll have pics soon

teddyrx2

iTrader: (33)

Im game it will save me lots of money on body work I would like the hood and the fenders

snoopy13b

Do they have Corolla parts? I need fenders for my KE15
Holla back.
This is VAZ
The 1 you bought the RX2 from, whats up?

RoTaRyBoYz

yo Vaz whats up... did u pull out the 69 from behind the house? u better pull that **** out of the mud & put a tarp over it before the snow comes...i have the rx2 in my garage and i only started working on it last week....i took the front suspension off because to do coilovers & t2 brakes...in january im taking it to get media blasted so i can get all of the yellow paint off, i'll send u some pics....dont worry i'll ask my guy about the FG parts for the 69

Rotaryhaven

iTrader: (17)

I thought there was a guy in Jersey doing fiberglass up there. I am pretty sure somebody knows who he is....

3sand7s

iTrader: (1)

I have a source for fiberglass rx3 coupe fenders,SP lower valance and SP rear spoiler.There may be soon fiberglass noses available as well as the old RotaryEngineering large front air dam.This will save you tons of money on shipping from AU since it is very expensive.

GtoRx7

iTrader: (5)

any chance they can get 1976-79 Rx-4 body parts, like the hood?

RoTaRyBoYz

i've only been interested in rx2 FG parts, but the next time i speak with my contact i'll ask him about the other cars or maybe i'll have him post his parts list on the forum for the rest of u guys...so far the only problem with the aussie parts is the shipping..if shipping is reasonable then we could probably take the chance to import the body panels...i've imported a 8-10lb package from australia about a week ago and it cost me $40 AUD in postage with a 10day ETA to my door... right now my main focus is to get the CF hood & trunk for the rx2, and as soon as that project is 100% confirmed (1-2weeks more) then i'll get exact prices for the FG parts...i could have the guy come on the forum and speak to u fellas directly but the last time we tried that the person got banned because hes wasnt a paying vendor :-(
if u guys are really interested in the aussie parts then i suggest u visit the australian rotary forum, because there's alot of old skool parts and information thats posted on a daily basis...

snoopy13b

Hey Jerry is that guy from New Jersey from patterson. If so I had his contact info but lost it, do you have that info. His parts are of very good quality.

I know he makes the fenders and 1 piece clips.

VAZ

Triny I will be up in NY after the holidays, so I might shoot out around your way for a quick beer or

RoTaRyBoYz

i'll get more info on this jerry guy on when i see my boy from NJ sometime after the holidays... Vaz hit me up when u come to NY, i'll have the Corona in the cooler awaiting ur arrival :-D.. dude if u get some time could u check out that junk yard around ur way to see if they have the fender for the rx2, maybe u can bring it up for me... i emailed milton a website in australia on getting the tail lights for La kabuski but he never replied to say if he bought them,do u know if he did?

rotarydude

iTrader: (2)

I would be interested in seeing a picture of the SP FT Valance, if you are talking about the snow plow spoiler then i would be interested but if it is the one typical to ebay it is not an SP one

snoopy13b

we talked about them, but all his money is going into the engine right now. I am getting rid of all my motor parts and exsess stuff. I am going to drop all the money I get of that and some bonus money on a full body resto of my yota. I finally have all my parts in, and replaced all rusted parts. Time to make that bad boy look new again. It will be slow but clean, and boy do I mean clean!

VAZ. I still need fenders.

teddyrx2

iTrader: (33)

yo whats the deal and where is the information the fiber glass parts if any?

nBOOSTe

pipi fiber glass in puerto rico

mike_rudy

Does anyone know any contact info on anyone one makes rx3 1 piece front clips?

RollinRock

dito^

3sand7s

iTrader: (1)

SP's do have a lower chin valance if you will take note and look.Not all of them had the large snow plow air dam and even then the valance will be behind it.

mazda1200

iTrader: (1)

I had my rx-3 parts made by pipi fiber glass in puerto rico the best and is cheaper than getting them from australia...

BENDER420

im looking for a hood for the 73 RX-3 wagon, living in canada so Puerto rico is a little far!!

TulsaTurbo

Can you tell me how to get in touch with them?

1973rx

What coilovers are you using? Is it Ground Control? Also what other parts can the guy from Australia get? Post his web site or parts list. Thanks.

RoTaRyBoYz

im making custom control arms to use T2 spindles,hubs, GC camber plates & custom longer strut housing....my guy is still fabbing the control arms.. Fibremaz is the guy to contact for FG or CF parts, PM him

teddyrx2

iTrader: (33)

been there done that he don't seem to interested in the rx duce

RoTaRyBoYz

no one is interested in the rx2 but i have a good source for rx3 fiberglass panels in Australia....

TulsaTurbo

Can someone, anyone with info concerning fiberglass rx3 parts actually post contact information of these places regardless of location rather than say they have a source...