Hi i have an Aeromotive A1000-6 Injected Bypass Regulator, P/N 13109.

And the instrucions for it are kind of confusing. so i wanted to ask if any of you guys can just help me by tellin me in lamens terms how to properly install the FPR.

Thank you

 

and i plan on only using one of the sides and plug the other

 

There's really no instructions needed. You have an inlet that comes from the fuel pump, an outlet that goes to the fuel rail/carb and a return line that goes back to the fuel tank. The regulator will have several outlet ports and you just plug the one's that you don't use. And to set the pressure you will have to have a guage set on the outlet side and turn the screw on the top to the desired pressure with the car on.

 

ok thanks just wanted to make sure... better safe than sorry