4SFED

Just thought i would let you all in on my little project.
A 1974 Toyota Celica that i have almost finished installing a 13BT-REW into.

Some of the specs are:

GT40 BB turbo on a tuned length SS manifold
MoTeC M4 Pro ECU
Series 5 RX7 Turbo gearbox
Big FMIC
Custom fuel system - Paxton Kamikaze Pump, SX billett pressure reg, 2x 550cc & 4x 850cc injectors

Aiming for around 450RWHP (Dyno Dynamics) and mid 10sec quarters...

Anyway, i am in the middle of constructing a site for it (which i should finish pretty soon)

www.picknowl.com.au/homepages/frost

Have a look and see what you think!

rxrotary2_7

sounds good.
you may need more fuel.
why did you chose 4 850's over 2 larger secondaries? just curious.

rxrotary2_7

your photo section has some dead links

4SFED

I am *hoping* i have enough fuel, have to wait and see i 'spose...

The reason i went 4 x850's was due to the fact that in Oz nobody (that i know of) can really increase the flow of the side feed 850's, and i came across another set of 850's and a rail for next to nothing, so i got the additional injector mounts made up, and then shortened the fuel rail to suit.

Yeah, the site has dead links all over the place at the moment as i am still in the middle of building it... hopefully i can get it all completed soon and everything should work fine.

thanks for the feed back and as they say... keep an eye on this space for updates!

Scott 89t2

well 4x720cc will give out 400 at the wheels on a 13bt so I think you should be fine.