rx7_t78

hi i am new in this forum. i am really intreseted in a 4rotary and i am wondering how can it be mounted insdie the 3rd Gen Rx7?? where can i find place that builds and sell this motor??and at last how much (estimately) it would cost to get it running in rx7 3rd gen?

Thank you

ronbros3

HI I could build the engine, 4 rotor, it would be expensive and install it in the vehicle would be expensive. check ronsperformance.us or call me in daytona bch. at 386-253-0383

ronbros3

HI I could build the engine, 4 rotor, it would be expensive and install it in the vehicle would be expensive. check ronsperformance.us or call me in daytona bch. at 386-253-0383 . you have a fd model right. thank you RON

Quadulus

Ron.. I'm not seeing anything on your site about a 4 rotor.. Would that be made using 13b housings or 12a's? Also, could the FD tranny still be used without having to move the shifter?

MADBOOST

holy shat, you can fit a f ing 4 rotor in a fd?

rotariesrule

ron, i don't think you will get $19000 for that 1987 rx-7 turbo. and what is with all that "great stuff" insulation?

IaMtHeRuThLeSs1

yes you can fit a 4 rotor in a FD...i saw one in a drag race...ran like a 9 and it was still n/a...pretty sweet stuff

Speedworks

go look on google for "Kiwi racing+rotary"
they can hook you up with a 4 rotor krankshaft for about 5500$ ;-)

marlaman

Not to be a hater but how many times have you seen sombody post up 1 thread and that be it? considering he wants a "4rotary" this KID doesn't know what the hell is involved with anything to do with a rotary wankel engine. close the thread.

Matt

D3rELiC

why get a 4 rotor when you can fit a 12 rotor in a FD ???

you dont even need to get a custom driveshaft made cuz you wont need any!!!, only gotta modify the tranny tunel !!!!

Quadulus

hehe... you going to drop the twins for a single when you install that thing?

rotoryspeeddreamz

Forget the twins. You're going to need quadruple T88's

ChrisCassette

changing spark plugs will be fun

rotary emotions

that'll be a rather cool e-shaft... not to mention fuel consumption. Cool pic nevertheless

fi addict

ok... on a serious note
1 post? just ask if it will fit___answer,yes
how many people have done it? 6-12?
yes kiwi makes e-shafts (make sure the quote in in the correct dollar units)
get the motor or builder....THEN if you need an installer and you recovered from the build start asking for an installer. Its about a 20g-25g install plus motor costs
you need to search ALOT about this before just dropping the im going to do a r26b swap

http://www.mymazdarotary.com/mazda_r...paper_html.htm
http://cp_www.tripod.com/rotary/pg03.htm#R26B
https://www.rx7club.com/1st-generation-specific-1979-1985-18/4-rotor-engine-332411/
http://ausrotary.dntinternet.com/for...ghlight=4rotor
http://members.dslextreme.com/users/erika/scoot.wmv
http://www.mazdarotaryclub.com/forum...1&referrerid=1
http://www.mymazdarotary.com/mazda_r...r26b_paper.doc
that will get you started

re10

Geoff Bruce, in Auckland makes them. Cheap for the US - exchange rate etc.

marlaman

I don't understand why people are still responding to this thread. the kid who started the thread is obvoiusly like 15 and having a wet pipe dream. mods shoudl really close useless threads like this.

Matt

PS i'm in a crappy *** mood because jg1bad10th seems to have ripped me off. so i'm sorry i am overly offensive today

1RevvinFC3S

R26B=

HardDrive

Well I am glad noone listened to you. I did a Google search on this because I was curious about how it is done and the cost myself. And it brought me here, where i found a few very good informative links that answered the questions I had.

For those of you that posted Useful Information, I thank you.

Does anyone know off hand how the ignition on a 4 rotor works? that seems to be the one piece I am not able to easily find.

sinned2545

iTrader: (7)

http://www.pulseperformancere.com/in...p?page=product

$50,000 will get you
- Full quad rotor engine package complete with intake, exhaust headers & wired ecu.

HardDrive

damn thats about what i was thinking in the end would be, even with doing most the work myself.

Thnx Sinned!