Brought my new baby home!
 

Stopped by Jeff20B's and picked up some goodies! Thanks Jeff and Percent for helping me load all that stuff into the tahoe! I jusy finished unloading by myself. @12am :( 4 motors/1 guy, bad numbers. LOL Then left and drove to puyallup and picked up my new baby, she's sweet! Brought her by ArmyofOne's place and dropped in the street port, and dropped off goodies. :nod: Thanks again Jesus!

brought the super 7 home , had wastegate done and fmic . got some teakin to do.....10mm

Ordered my Ford 8.8 differential mounting kit from Grannys Speed Shop... and fed the car some more money.

Dropped the tank in the wifes and cleaned all the varnish out. Put fan shroud on mine and installed rad. Mounted efan, and filed timing marks into Gilmer drive and installed main and water pump pulleys. Routed wiring and hoses in both cars. (then realized I had no clamps for the 5/8 heater hoses) LOL Removed weber carb and intake from red car and installed on mine. removed rad from it and put in wifes. removed heater "hard line" from parts car and installed in mine. Went to parts store and dumped more money. LOL Ordered anodizing chemicals and dyes for doing my own anodizing. Installed freeze plugs in intake water ports. Collapsed. ;)

cleaned up engine bay , guled ic couplers so they wouldnt blow off again , changed out thermastat , put bumper and bra on , and guled broken consel down . 10mm

Pulled drivetrain , exhaust and heat shields. Mocked up engine and TII trans for measurements.

^^^^^^^^^^^ Soooooooooooo Jealous! ^^^^^^^^^^^
What a beast.

I pulled it out into the sun and gave it a much needed bath. Too dusty from the months it spent in the garage

Towed it home because a fuel line decided to crack on me :lol:

Actually got to work on MINE today! Put new hoses on, installed thermostatic relay for e-fan, bolted header on, installed fuel pump, fpr and gauge, ran new fuel lines, bypassed stock pump, wired harness to motor, installed optima red top and tie downs and bought new black MSD plug wires.

Worked on 2 FD's :d

fixed my radiator hose leak

installed s4 turbo tailights. then got pulled over for no license plate lights and got my car impounded. :(

For license plate lights? Did you have your license back yet?

Damn man.

Well I went and picked up my oil cooler from the welder. No more cracks. Big plus.

got the nice rad I stupidly poked a hole in repaired, remounted my e-fan (without poking a hole in the rad) and re-installed the whole thing. Re-jetted the dcoe and fired her up. Checked timing and went inside with a smile! Tomorrow.......... TEST DRIVE!

There's no way they impounded the car just for that. They must have uncovered something else while he was pulled over that warrented impounding the car. Unfortunate. :(

Bought some SS brake lines from Corksport yesterday and bought a JDM Efini steering wheel today.

got a new tranny for the T2, cheated on both of them with a jeep. wasn't too fun. I spent the day thinking of my sevens.

Got my FC skinnies in the mail and ordered my Mickey Thompson Drag radials. 26x8.5 15s. heehee...

blew coolant seals . thats what i did

license was suspended and no insurance.... got it back though. then today drove home with a faulty lower rad hose from enumclaw to tacoma. pray i dont have a fucked coolant seal....

moved the new motor in the shop. gettin ready to start the swap....

chased my phantom noise and tried to figure out what the hell keeps screwing with my idle. Still no joy on either front. Keeping my fingers crossed that I don't end up stranded between my place and Taco7 Friday. ;)

pulled ps pump from T2 cursed the SOB who stole my secound gen oil cooler for my FB, just noticed it was missing. I've lost 3 pairs of jack stands, a set of sockets, and now my oil cooler.

5 lug swap + 4piston caliper rebuild + kyb's and ground control coilovers + SS brake lines + hawk HP's + Brembo rotors + new fluids and fd wheels + spacers, and 4 new lug nuts = me exhausted. Still need to install a fuel cut switch, rebleed brakes, install front speakers, and yeah.... lots and lots to do... So far 18 hours (well, more but I dont count screwing off) in to it... gotta love project cars! :) And soon install the lsd, install a non grinding tranny, fix the rear main seal, replace the clutch/fly, and install a header- My body hurts just thinking about it... need to get those 2 lifts installed ASAP.

I am putting mine up for sale!

got hit by a mini van Y_Y

Woke up to carbon fiber.. I need hood pins lol

Possibly paint the project tonight or pull the motor. Both? We'll see

83 r x 7
 

i just re doing my enkies d 92 its a lot of work but i will post some pics when i am dome with before and after so please let me know what u think after i post them they will be awsome. and i did chnge both fuel filters today also u all have grate day and keep on loving your cars

new old wheels
 

here they are what you all thing??

Took her for her "maiden" voyage, to Panther lake to work. Lot's of nice corners and elevation changes and one long straight. She handled pretty well, out of tune for sure, but over 4000, she ran like her ass was on fire! Finally some fun! Woo Hoo!!! Now for some open hwy and Taco7 tommorow. ;)

Stripped the project car

cursed at it and kicked the tire.

Freakin sweet! :icon_tup:

Today I swapped my 60 F8s for 65 F9s and tried to tune with an eratic idle. LOL

Pulled out the interior, seats and all that ish. Started sanding the body and painting the drivers side fender

installed a new water pump which is still leaking because of the weep hole.. hating this car more and more everyday. i want to fix it, drive it once or twice and sell it :(

dont do it man. fix it and drive it. brake it and fix it agian.

i want to, i just need something reliable. both of my cars are out of commission at the moment :(

mocking up engine and tranny on car to construct transmission crossmember.

going to start it up and hope for the best

so are mine, but T2 should be up again today. I just need to get another car, so I don't have to stress if it runs or not. if only the fucker would stay fixed long enough for me to get some moneys. but I'm never selling. I got in an argument with my GF's dad a few weeks ago. Cause I won't sell them.

realized that i got ripped for 50 bucks and some beast 240 brakes for a faulty ass koyo. gaaah

jinxed.. have you tried letting him drive the 7? lol he might start buying you parts for it ;)

Cut off the 3" stainless w/Magnaflow weld in exhaust I had on. Pulled my RB dual exhaust off the red 84 and put it on the beige one. WOW! What a difference. I can hear my alt grind now. :( Much smoother sounding and the neighbors will be happier.

Put R32 rims on.

^^ beautiful. i sold mine today. i have one left but im officially out of the game.

Installed a black interior and looked a 93 FD with blown coolant seals :(

not a chance I'd ever let that fucker near my car, #1 always drunk, #2 no licence and can never have one due to 5 DUI's, #3 He's a prick, and it takes alot for me not to swing on him. I let his wife drive it and yes she does buy me parts from time to time, with his money, she used to say she's an overpaid whore, but now she's a sexy bitch (her words), even insists I park in her driveway with my massive oil leaks dripping like crazy, that should be fixed this week also thanks to rob at pineapple.

wow.. sounds like my sisters neighbor. people like that are so bothersome, ever to just visit. sorry to hear that though, probably wouldn't have made that comment had i known that. sounds like his wife is pretty cool at least ^_^.