Steve Kan Tuning Day
Ok, let's start the list.
There are some holes so please fill them in for me...
Tune #1 = stock turbo
Tune #2 = aftermarket turbo < 16psi
Tune #3 = aftermarket turbo 16-25psi
Tune #4 = all the fixin's
1. Z-beater REW w/ PFC Tune #3
2. Woundup7 13bt w/ PFC Tune #___
3. Anton 13b w/ microtech Tune # ___
4. Johgar REW w/ PFC Tune # ___
5. Zack4173 REW w/ PFC Tune #___
6. Guanco 13bt w/ microtech Tune # ___
7. Guanco 13bt w/ microtech Tune # ___
8. Guanco 13bt w/ microtech Tune # ___
Maybe list:
9. kompreserlogic 13b turbo 6 ports w/ Haltech Tune # ___
10. Marcus219 13bt w/ haltech Tune # ___
11. Rotary power101 REW w/ PFC Tune # ___
Please PM me what tune you would like. If someone from the maybe list wants to move up let me know.
There are some holes so please fill them in for me...
Tune #1 = stock turbo
Tune #2 = aftermarket turbo < 16psi
Tune #3 = aftermarket turbo 16-25psi
Tune #4 = all the fixin's
1. Z-beater REW w/ PFC Tune #3
2. Woundup7 13bt w/ PFC Tune #___
3. Anton 13b w/ microtech Tune # ___
4. Johgar REW w/ PFC Tune # ___
5. Zack4173 REW w/ PFC Tune #___
6. Guanco 13bt w/ microtech Tune # ___
7. Guanco 13bt w/ microtech Tune # ___
8. Guanco 13bt w/ microtech Tune # ___
Maybe list:
9. kompreserlogic 13b turbo 6 ports w/ Haltech Tune # ___
10. Marcus219 13bt w/ haltech Tune # ___
11. Rotary power101 REW w/ PFC Tune # ___
Please PM me what tune you would like. If someone from the maybe list wants to move up let me know.
Maybe it's your engine builder? Sound like something like that..
I've been reading the posts for months and I never wrote anything but this time I have to say something. On may 19th we had Steve come to Montreal for a tuning session for 5 single turbo fd3s. Out of 5 engines tuned, 3 have blown up. I was the first one to go with Steve, my car had 3000km(1900miles) on a brand new ported engine and it was running great. I had 95 of compression the day before.We went on the highway to tune the car even though he never asked me what kind of set-up I had under the hood??? We did 5 pulls and then I noticed that the car was running awful on idle. Steve agreed and we went back to the shop....the car now had 60 of compression and would never start when hot. I had the engine inspected and the springs were almost flat and the seals were curved so they couldn't seal properly. Diagnostic : extreme heat probably because I went to lean for a short time. So 25 minutes , 5 pulls and 1000$ of repair for 450$..what a deal!!
The other 2 guys have rear rotor with 0 compression!! So good luck to you guys!!
The other 2 guys have rear rotor with 0 compression!! So good luck to you guys!!

But seriously, if I can get this together and ready in enough time to give you guys notice, I will be there. But please don't count on me as I am going to be one of those guys who really won't let you know until the last minute that is availiable. Just the best I can do for now. Money isn't the problem by any means, just time.
But again, if this is something I can make, I will make it. I bet that man can squeeze high 300's out of my setup.
A deposit will be required. I am not sure what Steve's stipulations are for a "walk-in". Something between you and him will work out.
I have a couple questions out to Steve and as soon as I hear back from him we will get the deposits rolling in.
I have a couple questions out to Steve and as soon as I hear back from him we will get the deposits rolling in.
Hello all,
I organized the last tune so I'll chime in.
First, my tune works great. It isn't comparable to my ground zero tune. No hiccups, no stalls. It makes impressive power and is remarkably smooth. No BS.
Steve solved some significant problems on other people's cars, both mechanical and electrical as well as tune related.
If you do this, come to the tune with the car prepared, with the car sorted. I offered a pre tune car check out day and I was the only one to come. Check your ignition, change your plugs (with ones appropriate to your setup), change your fuel filter, air filter, etc, etc. Pretend like the tune is 1 month before it is and have your car ready and then sort out the odds and ends problems for the next month.
It is well worth it, and I'm remarkably pleased.
Regards,
Justin Wade
I organized the last tune so I'll chime in.
First, my tune works great. It isn't comparable to my ground zero tune. No hiccups, no stalls. It makes impressive power and is remarkably smooth. No BS.
Steve solved some significant problems on other people's cars, both mechanical and electrical as well as tune related.
If you do this, come to the tune with the car prepared, with the car sorted. I offered a pre tune car check out day and I was the only one to come. Check your ignition, change your plugs (with ones appropriate to your setup), change your fuel filter, air filter, etc, etc. Pretend like the tune is 1 month before it is and have your car ready and then sort out the odds and ends problems for the next month.
It is well worth it, and I'm remarkably pleased.
Regards,
Justin Wade
Thanks for the comment Justin. Good idea with the pre-tune day. Once I hear back from steve we will start sending in deposits.
Here is an updated list:
1. Z-beater REW w/ PFC Tune #3
2. Woundup7 13bt w/ PFC Tune #2
3. Anton 13b w/ microtech Tune #1
4. Johgar REW w/ PFC Tune #2
5. Zack4173 REW w/ PFC Tune #1
6. Guanco 13bt w/ microtech Tune # ___
7. Guanco 13bt w/ microtech Tune # ___
8. Guanco 13bt w/ microtech Tune # ___
Maybe list:
9. kompreserlogic 13b turbo 6 ports w/ Haltech Tune # ___
10. Marcus219 13bt w/ haltech Tune # ___
11. Rotary power101 REW w/ PFC Tune # ___
12. Linenoise REW w/ PFC Tune # 1
Here is an updated list:
1. Z-beater REW w/ PFC Tune #3
2. Woundup7 13bt w/ PFC Tune #2
3. Anton 13b w/ microtech Tune #1
4. Johgar REW w/ PFC Tune #2
5. Zack4173 REW w/ PFC Tune #1
6. Guanco 13bt w/ microtech Tune # ___
7. Guanco 13bt w/ microtech Tune # ___
8. Guanco 13bt w/ microtech Tune # ___
Maybe list:
9. kompreserlogic 13b turbo 6 ports w/ Haltech Tune # ___
10. Marcus219 13bt w/ haltech Tune # ___
11. Rotary power101 REW w/ PFC Tune # ___
12. Linenoise REW w/ PFC Tune # 1
**all people getting their cars tuned please PM me**
Ok, to make this simple we are going to start accepting deposits now. I will collect all the deposits and then send them to Steve. I would appreciate it if people would make the check out to Steve.
Once I recieve the deposits I will send them via certified mail.
$200 per person for a deposit is mandatory. Dyno time will be 85 per hour and will be held at horsepower connection. Dyno time will be paid for after tune.
Ok, to make this simple we are going to start accepting deposits now. I will collect all the deposits and then send them to Steve. I would appreciate it if people would make the check out to Steve.
Once I recieve the deposits I will send them via certified mail.
$200 per person for a deposit is mandatory. Dyno time will be 85 per hour and will be held at horsepower connection. Dyno time will be paid for after tune.
OK! Here is the skinny!
Tune Date: Oct 13th & 14th
Tuner: Steve Kan
Website: www.stevekantuning.com
Time: 10:00AM-??
Place Horsepower Connection
Address: 3939 12th Ave Bldg 2 Unit C
Website: Horsepowerconnection.com
I have received 7 deposits. I know that there are still a few people that are on the fence and we might be able to squeeze you in if we have time (Do not count on this though). I am not sure what Steve’s policy is on “last minute” tunes but if you are interested you can send a $200 deposit to him at the address listed below.
Steve Kan
6712 Spoonwood Ln
Fort Worth, TX 76137
I have created a schedule. If you would like a certain time please let me know ASAP. If you do not care I will place you randomly. Schedule will be solidified by Oct 5th.
Saturday Oct 13th
10:00
12:00 Bliskin
2:00
4:00
6:00
Sunday Oct 14th
10:00
12:00
2:00
4:00
6:00
This schedule is subject to change depending on a few factors.
If there are any questions please feel free to PM me.
Thanks,
David
Tune Date: Oct 13th & 14th
Tuner: Steve Kan
Website: www.stevekantuning.com
Time: 10:00AM-??
Place Horsepower Connection
Address: 3939 12th Ave Bldg 2 Unit C
Website: Horsepowerconnection.com
I have received 7 deposits. I know that there are still a few people that are on the fence and we might be able to squeeze you in if we have time (Do not count on this though). I am not sure what Steve’s policy is on “last minute” tunes but if you are interested you can send a $200 deposit to him at the address listed below.
Steve Kan
6712 Spoonwood Ln
Fort Worth, TX 76137
I have created a schedule. If you would like a certain time please let me know ASAP. If you do not care I will place you randomly. Schedule will be solidified by Oct 5th.
Saturday Oct 13th
10:00
12:00 Bliskin
2:00
4:00
6:00
Sunday Oct 14th
10:00
12:00
2:00
4:00
6:00
This schedule is subject to change depending on a few factors.
If there are any questions please feel free to PM me.
Thanks,
David
^Thanks, a lot of people that are going to tune have had some pretty major issues in the last 3-4 weeks. Looks like everyone is going to pull through though.
Saturday Oct 13th
10:00
12:00 Bliskin
2:00 Z-Beater
4:00 zack4173
6:00 Woundup7
Sunday Oct 14th
10:00
12:00
2:00
4:00
6:00
Saturday Oct 13th
10:00
12:00 Bliskin
2:00 Z-Beater
4:00 zack4173
6:00 Woundup7
Sunday Oct 14th
10:00
12:00
2:00
4:00
6:00
Ha, thats what I was thinking too. My kan tune on my single fd is prefectly smooth. Drives even better than the car did when it was stock, except its making 375 to the wheels.
Maybe you guys dont get good gas up in toronto?
Maybe you guys dont get good gas up in toronto?


