RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   NW RX-7 Forum (https://www.rx7club.com/nw-rx-7-forum-33/)
-   -   Oregon Rx-7 Owners (https://www.rx7club.com/nw-rx-7-forum-33/oregon-rx-7-owners-692625/)

ProjectKyo 10-08-07 11:38 PM


Originally Posted by kapn krunch (Post 7401322)
i was at my wits end with the pullers i was the inventory guy that had to look for all the zeroed parts i would get 130+pages of zeroed parts everymorning that i had to go look for and 99% of them where right flipping there where they should of been. it because robert l wont fire pullers for not doing there job. and most of the large parts in area 7 get zeroed becasue people are to lazy to get on a manlift and get them down. almost everyone there was lift certified.

haha inventory guy.... matt? lol

MazdalicousRx7 10-09-07 11:13 AM

I live in milwaukie but usually spend my time in se portland, by 82nd and holgate. i drive a red 88 2+2 "slammed":cool: to the ground.

ProjectKyo 10-09-07 02:58 PM


Originally Posted by MazdalicousRx7 (Post 7402466)
I live in milwaukie but usually spend my time in se portland, by 82nd and holgate. i drive a red 88 2+2 "slammed":cool: to the ground.

nice but i've never seen you and i'm around there a lot as well.

The Spyder 10-09-07 04:17 PM

I have seen both of you.
I work off river road.

Qhasan31 10-09-07 04:20 PM

Quyet, haha I don't even have your number and the 7 is down for right now.... Gotta get a new rear driver control arm, bent the shit out of it hittin the curb. You might not have some extra wheel by chance do you? or is your fc 4 lug? Or anyone here have a pair of TII GXL rims? haha I need some bad! Just 2

Qhasan31 10-09-07 04:21 PM

I think I've seen you!

MWMburton 10-09-07 08:27 PM


Originally Posted by kapn krunch (Post 7401322)
i was at my wits end with the pullers i was the inventory guy that had to look for all the zeroed parts i would get 130+pages of zeroed parts everymorning that i had to go look for and 99% of them where right flipping there where they should of been. it because robert l wont fire pullers for not doing there job. and most of the large parts in area 7 get zeroed becasue people are to lazy to get on a manlift and get them down. almost everyone there was lift certified.

130 pages thats ridiculous!!! yah i wish they had fired the damn highschoolers after a few mess ups but NNNNNNNNNNOOOOOOOOOO theyd just chew there ass out and then give em a pat on the back and tell em its ok. fricken A!!! even now theyre still zeroing parts when they show 20 or more. i ordered hella conversion for my fb so i could have some decent lights and they showed 48 in stock at hillsboro, zeroed. i oredered em from seattle and they showed up with the nite stock when i ordered em at 5!!! it was awesome. but now im waiting for an engine crane i ordered last week, they show 24 in stock. my part is tagged toted and no one has picked it up!!! i think i'll swing by will call and tear em a new asshole :)

kapn krunch 10-10-07 12:29 AM


Originally Posted by ProjectKyo (Post 7401354)
haha inventory guy.... matt? lol

nope did the am shift 6-2:30 m-f

kapn krunch 10-10-07 12:33 AM


Originally Posted by MWMburton (Post 7404309)
130 pages thats ridiculous!!! yah i wish they had fired the damn highschoolers after a few mess ups but NNNNNNNNNNOOOOOOOOOO theyd just chew there ass out and then give em a pat on the back and tell em its ok. fricken A!!! even now theyre still zeroing parts when they show 20 or more. i ordered hella conversion for my fb so i could have some decent lights and they showed 48 in stock at hillsboro, zeroed. i oredered em from seattle and they showed up with the nite stock when i ordered em at 5!!! it was awesome. but now im waiting for an engine crane i ordered last week, they show 24 in stock. my part is tagged toted and no one has picked it up!!! i think i'll swing by will call and tear em a new asshole :)

skip baxter wants to burn down the hillsboro warehouse he hates it. he ordered a gdi rad for a customer we had 7 on hand and it didnt show at store #1 until 37 hours later he was pissed. last time i was in store#1 they said they lost 70k in sales in one month at that store alone. the reason you havent seen your hella from hillsboro is no one can read the hella part numbers there. to many numbers on the package for them to figure out.

ProjectKyo 10-10-07 01:29 AM


Originally Posted by kapn krunch (Post 7405103)
skip baxter wants to burn down the hillsboro warehouse he hates it. he ordered a gdi rad for a customer we had 7 on hand and it didnt show at store #1 until 37 hours later he was pissed. last time i was in store#1 they said they lost 70k in sales in one month at that store alone. the reason you havent seen your hella from hillsboro is no one can read the hella part numbers there. to many numbers on the package for them to figure out.

haha I hated the hillsboro warehouse. Made me sick because of the mold. The aisles weren't correctly marked so aisle J was actually I and that confused me for the short time i was there.

Josh18_2k 10-10-07 02:41 AM

isnt it wierd how 90% of portland rx7 owners work(ed) at pw...
yah i was da illest weekend puller.. but 8.50 aint cutting it (and hillsboro is too damn far!). so now i drive a truck for almost twice that.

Erox 10-10-07 11:05 AM

You may have seen me around portland/beaverton...I drive a chevy s10... stock... metal rims....
Oh and my montego FD :lol2:

which is in pieces *see the monster thread

so until then its a :Wconfused paper weight!

lol buy my parts so I can pay off my swap!

kapn krunch 10-10-07 12:10 PM


Originally Posted by ProjectKyo (Post 7405207)
haha I hated the hillsboro warehouse. Made me sick because of the mold. The aisles weren't correctly marked so aisle J was actually I and that confused me for the short time i was there.

ya that mold was focking sweet i was out for two weeks becasue it made me cough so hard i started blowing chunks from it. and when they kept changing the isles that was a nightmare

ProjectKyo 10-10-07 01:51 PM


Originally Posted by kapn krunch (Post 7406225)
ya that mold was focking sweet i was out for two weeks becasue it made me cough so hard i started blowing chunks from it. and when they kept changing the isles that was a nightmare

don't you have a case against them then?

MWMburton 10-16-07 08:22 PM


Originally Posted by kapn krunch (Post 7405103)
skip baxter wants to burn down the hillsboro warehouse he hates it. he ordered a gdi rad for a customer we had 7 on hand and it didnt show at store #1 until 37 hours later he was pissed. last time i was in store#1 they said they lost 70k in sales in one month at that store alone. the reason you havent seen your hella from hillsboro is no one can read the hella part numbers there. to many numbers on the package for them to figure out.

lol yah i wouldnt wanna make skip mad. any baxter for that matter, anyone in the "higher up's" in baxter i dont wanna make mad. lol i like my job :)

i got the hella conversion eventually but first they sent the wrong ones and then i ordered the euro spec ones and but em on that day so its all good. the warehouse is just in shambles, there are soo many things to fix. not just in the warehouse but in all the stores, i think since the warehouse move all the stores inventories are off or maybe ours is but now were switching brands on certain parts n everyone puts em in the wrong spot!!! arg!

kapn krunch 10-16-07 08:45 PM


Originally Posted by MWMburton (Post 7427273)
lol yah i wouldnt wanna make skip mad. any baxter for that matter, anyone in the "higher up's" in baxter i dont wanna make mad. lol i like my job :)

i got the hella conversion eventually but first they sent the wrong ones and then i ordered the euro spec ones and but em on that day so its all good. the warehouse is just in shambles, there are soo many things to fix. not just in the warehouse but in all the stores, i think since the warehouse move all the stores inventories are off or maybe ours is but now were switching brands on certain parts n everyone puts em in the wrong spot!!! arg!

the inventory was a joke all they had me do was put an x there if it was on the shelf no counting or anything. and when i asked how that was going to help the problem they went off about shut up and do what im told. when i told dave from the tigard store he was like f this warehouse. most of the employees hoped it would burn to the ground

MWMburton 10-16-07 08:54 PM

yah i really wish it would just funtion the way it should, get rid of the idiots and start gettin organized. the guys who do the nite stock do a pretty good job but the ppl in the day might as well had called in sick cuz then theyd have a reasonable excuse to not get our parts. and the ppl who run w/c r asses, "blah blah blah im busy right now" . . . "GET ME MY DAMN PARTS!!!" gesh i fricken could throttle some of those ppl

kapn krunch 10-16-07 11:44 PM


Originally Posted by MWMburton (Post 7427404)
yah i really wish it would just funtion the way it should, get rid of the idiots and start gettin organized. the guys who do the nite stock do a pretty good job but the ppl in the day might as well had called in sick cuz then theyd have a reasonable excuse to not get our parts. and the ppl who run w/c r asses, "blah blah blah im busy right now" . . . "GET ME MY DAMN PARTS!!!" gesh i fricken could throttle some of those ppl

the problem starts with the managers robert and keith both need to go. they are the reason they have so many lame employees. and the w/c desk needs people that arent so overstressed to work it they talk that way to clients and wc customers alike. they have lost many good employees because of the management alone for being so rude to them about making the rest of the "team" look bad by getting to much done.

MWMburton 10-17-07 08:21 PM

thats ridic, if the rest of the "team" cant keep up too bad for them they need to get there ass in gear n get the job done. if someone told me i was doing to good of a job id be a lil confused and if they said i was makin em look bad id tell em they need to ship up or ship out

micah 10-19-07 12:29 AM

Hi folks... I am not driving an FC right now, but I was driving a patchy white S5 NA in Newberg, Sherwood, Hillsboro and the areas between. My car will be finished soon... Start looking for a shiny black S5 NA. :) See sig link "My Car" for more info on the car... currently painting it in my booth.

I NEVER see 7's.... there is a nice black FD here in Newberg though on my way home from work (hwy 219).

ProjectKyo 10-19-07 01:47 PM


Originally Posted by micaheli (Post 7435482)
Hi folks... I am not driving an FC right now, but I was driving a patchy white S5 NA in Newberg, Sherwood, Hillsboro and the areas between. My car will be finished soon... Start looking for a shiny black S5 NA. :) See sig link "My Car" for more info on the car... currently painting it in my booth.

I NEVER see 7's.... there is a nice black FD here in Newberg though on my way home from work (hwy 219).

Wow I can't wait to see your car. From the pics it looks hella sick already. The interior is already batter than the entire condition of my car. I wish I could do the same for mine, but unfortunately my 7 is my daily driver. I'd love to slap on a new paint job but no time and resources.

micah 10-19-07 01:53 PM


Originally Posted by ProjectKyo (Post 7436815)
Wow I can't wait to see your car. From the pics it looks hella sick already. The interior is already batter than the entire condition of my car. I wish I could do the same for mine, but unfortunately my 7 is my daily driver. I'd love to slap on a new paint job but no time and resources.

I hear ya, I bought a beater nissan sentra to drive while I'm doing this. 500 dollar car and so far its treating me somewhat well.. sucks to drive though. :)

rx7guy27 10-19-07 03:27 PM

I am in gresham, I work at Autozone on division. I tried to get on at Baxters but they didnt want to hire me, maybe that is a good thing, not that I get paid very well at Autozone but I am working on being moved up to PSM. I kind of like working there, I hated doing my other job installing windows in homes but I sure am good at doing that. Oh hey Scott, its good to see you have joined the forum, sorry I havent called in awhile been busy with stuff.

ProjectKyo 10-20-07 02:10 AM


Originally Posted by rx7guy27 (Post 7437140)
I am in gresham, I work at Autozone on division. I tried to get on at Baxters but they didnt want to hire me, maybe that is a good thing, not that I get paid very well at Autozone but I am working on being moved up to PSM. I kind of like working there, I hated doing my other job installing windows in homes but I sure am good at doing that. Oh hey Scott, its good to see you have joined the forum, sorry I havent called in awhile been busy with stuff.

aw man theres a autozone on division? damn is it closer than the 82nd one?

Josh18_2k 10-20-07 02:08 PM

164th and division. across the street from baxters. they probably scowl at each other through the windows.


All times are GMT -5. The time now is 04:17 PM.


© 2024 MH Sub I, LLC dba Internet Brands