oregon emissions
#1
Junior Member
Thread Starter
Join Date: Jul 2009
Location: Portland,OR
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
oregon emissions
so i was wondering how hard it is to pass emission in oregon cuz i got an FC that i need to register and go through emissions. The guy i bought it from put an exhaust on it that looks to be about 2 1/2 with no muffler tips and it has one cat before the y pipe . Is this gonna be able to pass in oregon?
#2
Rotary Zealot!
iTrader: (8)
Yes.
But how is the question.
Try running it through DEQ how it is now, and let us know what the readings are if you fail [or if you pass ]
at worst.. You might have to borrow or buy a new cat, run it down to 1/8th tank and put two bottles of isoheet in the tank, and connect the output of the air pump to the cat ext. tube ["Split air pipe"]
Depending on your readings if you fail, is where we switch from using your cat or a different one. [The rest of the procedure is the same]
But how is the question.
Try running it through DEQ how it is now, and let us know what the readings are if you fail [or if you pass ]
at worst.. You might have to borrow or buy a new cat, run it down to 1/8th tank and put two bottles of isoheet in the tank, and connect the output of the air pump to the cat ext. tube ["Split air pipe"]
Depending on your readings if you fail, is where we switch from using your cat or a different one. [The rest of the procedure is the same]
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM