No one will touch my driveline
Thread Starter
They live We sleep
iTrader: (1)
Joined: Feb 2009
Posts: 919
Likes: 0
From: Dot Island
No one will touch my driveline
OK so i wanted to get new bearings in my driveline. The guy says he cant do it.. took it to a few places.. I know they can be replaced i have seen someone get it done. Do i have to buy a brand new Driveline?
88rx7 btw 5speed
88rx7 btw 5speed
Thread Starter
They live We sleep
iTrader: (1)
Joined: Feb 2009
Posts: 919
Likes: 0
From: Dot Island
The driveline i got at the meet is either bad. or i dammaged the seal.. Im working on getting it fixed. But would be nice to get new (spare) driveline so i wont have to worry about it for a long time...
Thread Starter
They live We sleep
iTrader: (1)
Joined: Feb 2009
Posts: 919
Likes: 0
From: Dot Island
I think either the driveshaft seal got ate up by the driveshaft.. Looks like its been sand papered for some reason the part that fits inside the tranny.. OR i damaged the seal when trying to take it out without lowering the exhaust..
Ill know a bit later..
Now i bet i got everyone beat on leaks....
Gear box leak. Oil leak Water Leak.. And clutch leak. heh
Trending Topics
Thread Starter
They live We sleep
iTrader: (1)
Joined: Feb 2009
Posts: 919
Likes: 0
From: Dot Island
UPDATE:
So i took the drive line back out. Also took the tranny seal out too..
I took my old drive shaft and the one i got from the nice dude forgot his name. the guy with the 944 in oly.. I looked at both side by side. And my drive line is shiny and polished.. Like the Hydrolic shafts you see at construction sites. And i looked at this drive line i just took back off. and it looks very grainy and cloudy.. even looks like someone took sand paper to it in a circler motion. Is this bad? or would it make any difference?
I put a New seal in, And Looked at the old one. Cant really tell worth **** if there is something wrong with it. Looks fine to my eye..
I hate to put the drive line back in to a new seal if its going to eat it away!
Can the drive line be Re polished? So it wont make friction with the seal?
If anyone has a spare Drive line for a 5speed it would be nice. I would like to get out of the house this weekend.. thanks
So i took the drive line back out. Also took the tranny seal out too..
I took my old drive shaft and the one i got from the nice dude forgot his name. the guy with the 944 in oly.. I looked at both side by side. And my drive line is shiny and polished.. Like the Hydrolic shafts you see at construction sites. And i looked at this drive line i just took back off. and it looks very grainy and cloudy.. even looks like someone took sand paper to it in a circler motion. Is this bad? or would it make any difference?
I put a New seal in, And Looked at the old one. Cant really tell worth **** if there is something wrong with it. Looks fine to my eye..
I hate to put the drive line back in to a new seal if its going to eat it away!
Can the drive line be Re polished? So it wont make friction with the seal?
If anyone has a spare Drive line for a 5speed it would be nice. I would like to get out of the house this weekend.. thanks
I've got oil pan gasket leak, MOP leak, exhaust leak, heater core leak, and my gas use to leak. I had you beat but now were tied. I got the gas leak taken care of asap. sorry for the tread jack.
Thread Starter
They live We sleep
iTrader: (1)
Joined: Feb 2009
Posts: 919
Likes: 0
From: Dot Island
Oh no problem.
I have a water leak mixing with the oil leak. to make a watery oily leak.
its just pissing me off so bad cause i cant tell where its all coming from... besides the damn tranny leak i am hoping to fix. The 5speed gear oil leak is what i worry about the most...
No Warning light for the 5speed.. you loose the gear oil your flucked.
I have a water leak mixing with the oil leak. to make a watery oily leak.
its just pissing me off so bad cause i cant tell where its all coming from... besides the damn tranny leak i am hoping to fix. The 5speed gear oil leak is what i worry about the most...
No Warning light for the 5speed.. you loose the gear oil your flucked.
Thread
Thread Starter
Forum
Replies
Last Post
George84
2nd Generation Specific (1986-1992)
8
Sep 28, 2015 11:58 PM
ZaqAtaq
New Member RX-7 Technical
2
Sep 5, 2015 08:57 PM



