Hey I got my fc in a friends shop and I was looking for a vacuum leak and ended up taking the intake manifolds off. I got everything back together but not it won't even run. It starts up, idles poorly, and then dies. Anyone rotary gurus locally that can give me a hand?

Need to get this thing up and running stat.

 

Vac line not in place would cause that on a MAF base car.

GL

 

have you tried the starter fluid test for a vac leak?

 

I can't get it running long enough to spray for leaks. I'll probably just take it apart again to see if i missed anything, but as far as i know it's all there.

 

Well I barely got it running enough to spray for leaks, and found one under the intake manifold. Guess it all has to come off again.

 

hey PM RW-7 here on the forum. He lives in Albany and if he has some free time would drive out to work on it. He's made my car feel new again and should be able to fix this for ya.

 

Hey Im back I was at Formula drift. Pm me James.

 

Hey does anyone know where to find metric vacuum hose in the corvallis area? So far I've only found 3.5mm, but can't find 6mm. I've checked with napa, autozone, carquest, and even a couple dealers.