NW RX-7 Forum Serving Washington, Oregon, Idaho and Alaska members

BSCC Race #2 - Reg Open Now

Old Mar 27, 2008 | 12:45 AM
  #1  
Kill No Cone's Avatar
Thread Starter
Rotary Freak
Tenured Member: 20 Years
iTrader: (6)
 
Joined: May 2002
Posts: 1,989
Likes: 2
From: Olympia WA
BSCC Race #2 - Reg Open Now

Time to register for the next Bremerton autocross. For more info go to www.bscc.net
Reply
Old Mar 27, 2008 | 10:21 PM
  #2  
Fault Bucket's Avatar
77333
Tenured Member 05 Years
 
Joined: Aug 2006
Posts: 221
Likes: 0
From: Burien, WA
I'm gonna register, but I'll probably be looking for a co-drive for this one. I got some Stance GR+ coilovers on the way but they won't be here in time...the car needs an alignment something fierce and I refuse to pay for one before I get the coilovers on...
Reply
Old Mar 27, 2008 | 11:47 PM
  #3  
Kill No Cone's Avatar
Thread Starter
Rotary Freak
Tenured Member: 20 Years
iTrader: (6)
 
Joined: May 2002
Posts: 1,989
Likes: 2
From: Olympia WA
Chris,
Just run it the way it is as a reference point to compare against the new coil overs.
Reply
Old Mar 28, 2008 | 11:52 AM
  #4  
violentsnail's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Mar 2007
Posts: 57
Likes: 1
From: Redmond
Done and done, hopefully my primary turbo boosts by then...stupid FD solenoids.
Reply
Old Mar 28, 2008 | 12:04 PM
  #5  
ZeroDrift's Avatar
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (1)
 
Joined: Sep 2005
Posts: 776
Likes: 0
From: Denver
I wont be able to make this event. I may go to watch and take some pictures, but I doubt I will race.
Reply
Old Mar 28, 2008 | 01:37 PM
  #6  
afgmoto1978's Avatar
Lift Off in T-Minus...
Tenured Member: 20 Years
iTrader: (6)
 
Joined: Jul 2005
Posts: 2,913
Likes: 4
From: Kingman, AZ
Hey, I have some solenoids for sale if your in need of them.

https://www.rx7club.com/showthread.php?t=736399&page=2
Reply
Old Mar 29, 2008 | 12:02 AM
  #7  
Rx7TyreBurna's Avatar
Becoming pure track...
Tenured Member 15 Years
iTrader: (1)
 
Joined: Feb 2005
Posts: 1,069
Likes: 0
From: Olympia, WA
I wish I could run this one. I was at the first one, but my wheel bearings are shot. Bleh, so, now I need to order new ones, and put those in. But, there is quite a bit to it.

Hopefully #3. I am also going to order strut tower bars.

Might show up to watch the P.M.
Reply
Old Mar 29, 2008 | 01:35 PM
  #8  
woundup7's Avatar
The Outsider
Tenured Member 10 Years
iTrader: (1)
 
Joined: Jul 2003
Posts: 1,050
Likes: 0
From: Deep in 6th
Just a reminder RX7 drivers, if you attend 2 events, you can register with Mazdaspeed for steep discounts on factory oem parts, i.e. wheels bearings, which I bought last year for about 40% of local retail. also some aftermarket performance parts like hawk brake pads, tokico shocks etc, 2 events costs you $50 you can easily recoup that just buying brake pads for all 4 corners.,

Now if I just could BMW NA onboard!
Reply
Old Mar 30, 2008 | 04:25 PM
  #9  
rotorette's Avatar
That Chick
Tenured Member 05 Years
 
Joined: Jul 2006
Posts: 468
Likes: 0
From: WA State
You can save $10 by pre-registering at http://www.autocrossscorekeeper.com/register/bscc/

Hope to see some of you out there. Chris and I will be headed over to the Mexican restaurant in Port Orchard after the event if you want to join us to celebrate my last day being 30!

M
Reply
Old Apr 4, 2008 | 03:29 PM
  #10  
Fault Bucket's Avatar
77333
Tenured Member 05 Years
 
Joined: Aug 2006
Posts: 221
Likes: 0
From: Burien, WA
Originally Posted by Kill No Cone
Chris,
Just run it the way it is as a reference point to compare against the new coil overs.
Just found out that the new coilovers are on the way...I'll have them on Wednesday. I should be able to get them on and do a rough string-and-tapemeasure alignment before Sunday. I'll still need to get an accurate corner-weighting and alignment done though.

Do you do your own corner weighting or go to a shop?
Reply
Old Apr 4, 2008 | 05:27 PM
  #11  
dhays's Avatar
Rotary Enthusiast
iTrader: (1)
 
Joined: Dec 2007
Posts: 1,151
Likes: 0
From: University Place, WA
Originally Posted by ZeroDrift
I wont be able to make this event. I may go to watch and take some pictures, but I doubt I will race.
Great. I could use some decent pictures of my car. My Avatar was from a pic that Rotorette took at one of the events. Maybe the novice school?

Originally Posted by Rx7TyreBurna
I wish I could run this one. I was at the first one, but my wheel bearings are shot. Bleh, so, now I need to order new ones, and put those in. But, there is quite a bit to it.

Might show up to watch the P.M.
Show up and spot for Zerodrift as he shoots pictures.

Originally Posted by rotorette
You can save $10 by pre-registering at http://www.autocrossscorekeeper.com/register/bscc/

Hope to see some of you out there. Chris and I will be headed over to the Mexican restaurant in Port Orchard after the event if you want to join us to celebrate my last day being 30!

M
My son and I are registered again. I'm also thinking about trying to make the WWSCC event this Sunday. A bit more expensive and my impression is they take things a bit more seriously, but still it is fun and I need all the experience I can get.
Reply
Old Apr 4, 2008 | 11:34 PM
  #12  
Kill No Cone's Avatar
Thread Starter
Rotary Freak
Tenured Member: 20 Years
iTrader: (6)
 
Joined: May 2002
Posts: 1,989
Likes: 2
From: Olympia WA
Chris, there was a local guy who letting guys use his scales, but he moved to Texas. I wish BSCC would by a set of scales for their members. You can chat with Fordahl or Chase Race in Duvall.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
Vendor Classifieds
5
Aug 9, 2018 05:54 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:25 AM.