Has anyone in the seattle area done this? and I was wondering if you'd help me and explain a little more on how to go about doing this thanks

 

pm endnue913 i dont think he done it but i think he knows how to

 

I've done it. Way more consistent than relying on your exhaust backpressure. I used a Wolo 10 psi air compressor for an air horn, relay, and MSD RPM switch. I can't remember which chip I used in the RPM switch cuz MSD actually reads the rotary as a 5 cylinder. So if you get a chip for 5000 then your compressor will activate at 4800 and 200 RPM over if you go for 6 cylinder.

I'm getting ahead of myself. Tell me how you want to make it and I'll help you out. Theres also an article about it here:

http://www.rotaryresurrection.com/1s...elec6port.html

 

yeah.....that write up is really really confusing especially cuz the pictures are really small

anyone done this?
https://www.rx7club.com/2nd-gen-archive-72/how-air-pump-auxilary-port-activation-330310/

oh btw i have a s4

 

I suppose that smog pump would work. I'm not running anything but power steering so I wouldn't know.