ack ack ack
#2
Rotary Enthusiast
Thread Starter
Join Date: Apr 2004
Location: King of the road
Posts: 908
Likes: 0
Received 0 Likes
on
0 Posts
NM i found tham all. However Does ANyone Know how to get the AC and the Power stearing pump off? Is there a trick to it? i cant get the third bolt that hold the power stearing pump on.. and the AC pump is in the way and i dont see how its going to come out unless the power stearing pump is out first! thanks for everyones help.. nothin like a helping hand ... this is for an 88gxl thanks
Last edited by Adam; 05-26-05 at 11:09 PM.
#3
Never give up!
iTrader: (8)
You have to remove the 4 12mm bolts that hold the AC compressor onto the bracket. You do not need to remove the power steering pump. Theres 2 14mm nuts, 2 14mm bolts, and 1 17mm nut holding it on. You should be able to pull the ac compressor out of the way enough to slip a wrench or ratchet in.
Theres 6 bolts that hold the motor onto the tranny, 3 on top, 3 on the bottom, 2 of them being on or under the starter.
Theres 6 bolts that hold the motor onto the tranny, 3 on top, 3 on the bottom, 2 of them being on or under the starter.
Thread
Thread Starter
Forum
Replies
Last Post
Geiiga
1st Generation Specific (1979-1985)
7
05-14-07 08:11 AM
Valkyrie
2nd Generation Specific (1986-1992)
4
02-05-06 12:13 PM