New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

What is this? Pic included

Thread Tools
 
Search this Thread
 
Old Sep 19, 2021 | 01:59 PM
  #1  
mstkawaiikitty's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2021
Posts: 7
Likes: 3
From: Magnolia DE
What is this? Pic included

https://imgur.com/wHRpuwc
I am trying to verify what this is so I can get a replacement. thanks.
Reply
Old Sep 19, 2021 | 02:42 PM
  #2  
diabolical1's Avatar
Moderator
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Feb 2002
Posts: 10,998
Likes: 349
From: FL
welcome to the board.

if you are talking about the missing cover plate, then you're looking at the bottom of the bell housing on the transmission.
Reply
Old Sep 20, 2021 | 05:57 PM
  #3  
mstkawaiikitty's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2021
Posts: 7
Likes: 3
From: Magnolia DE
Originally Posted by diabolical1
welcome to the board.

if you are talking about the missing cover plate, then you're looking at the bottom of the bell housing on the transmission.
Thank you!

Any idea where to find one?
Reply
Old Sep 20, 2021 | 06:14 PM
  #4  
diabolical1's Avatar
Moderator
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Feb 2002
Posts: 10,998
Likes: 349
From: FL
sorry. have no clue.

i guess the obvious place to start would be Mazda, particularly Ray Crowe. his contact information should be floating around the board. i wouldn't put much faith in finding one used. you don't see these trannies at all, much less parts for them.

outside of that, it shouldn't be hard to make one. make a template out of cardboard and take it somewhere you can get it made out of metal. get the needed bolts and bolt it on.

Last edited by diabolical1; Sep 20, 2021 at 06:18 PM.
Reply
Old Sep 20, 2021 | 06:15 PM
  #5  
mstkawaiikitty's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2021
Posts: 7
Likes: 3
From: Magnolia DE
Originally Posted by diabolical1
sorry. have no clue.

i guess the obvious place to start would be Mazda, particularly Ray Crowe. his contact information should be floating around the board.

outside of that, it shouldn't be hard to make one. make a template out of cardboard and take it somewhere you can get it made out of metal. get the needed bolts and bolt it on.
Okay, thank you! Thats honestly the best answer I have found so far.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
◡ KUZU◕7◕
2nd Generation Non-Technical and pictures
14
Apr 17, 2009 01:26 AM
FRFC3S
2nd Generation Non-Technical and pictures
5
Nov 27, 2008 09:00 PM
Cloud
2nd Generation Specific (1986-1992)
27
May 10, 2004 01:41 PM
RecKleSs
Interior / Exterior / Audio
11
May 27, 2002 03:01 PM




All times are GMT -5. The time now is 06:53 PM.