Hey guys, ive been dealing with a rather wierd situation with my Fc S4 Na. ive checked the starter wire,battery terminals,grounds,fuses,relays, all of them giving continuity and 12volts on all the main power wires i.e (Main fuse box, starter, fuel pump, battery, etc)

I noticed when i check the voltage on the ignition switch that,
*in order*
IG1=12v
L=0v
I=12v
B=12v
(black/red wire) =0.5v ??
E=0v
Acc=12v but when i turn key to start acc goes to 0v?

*also when i turn the key to acc get dash lights,harzards,front and back lights* '
but when i turn key to start all the lights die out...

anytips here? really just want this thing to start had it for a couple years now dealing with electrical issues..
if this is not clear at all please tell me how i can fill you in more thanks guys/everyone.

 

@HAILERS @HAILERS2

could you by chance give me some insight i've seen you in other post before and figured you might have an idea that i can't fathom

 

Nevermind turns out im super dumb, a connector for the red/black wire from the ignition switch to a connected above the clutch pedal was disconnected (also a red/black wire) once i plugged it back in i got power to my starter